GP10-4007EHE3/73

Series:	--
Packaging:	Tape & Box (TB)
Part Status:	Obsolete
Diode Type:	Standard
Voltage - DC Reverse (Vr) (Max):	1000V
Current - Average Rectified (Io):	1A
Speed:	Standard Recovery >500ns, > 200mA (Io)
Capacitance @ Vr, F:	--
Mounting Type:	Through Hole
Package / Case:	DO-204AL, DO-41, Axial
Supplier Device Package:	DO-204AL (DO-41)
Operating Temperature - Junction:	--
Base Part Number:	GP10-4007

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Introduction

GP10-4007EHE3/73 is a single rectifier diode, typically used to rectify alternating current (AC) to direct current (DC). Rectifier diodes are physical devices and components that allow current to flow in one direction, preventing current from passing in the opposite direction. Such devices are widely used in power supplies and logic circuits in a variety of applications, including aerospace and telecoms, military, power grids, and general-purpose electronics.

Application Field and Working Principle

GP10-4007EHE3/73 is widely used in power supplies and logic circuits in a variety of applications, including aerospace and telecoms, military, power grids, and general-purpose electronics. It is especially ideal for applications that require high voltage, high current, and low capacitance such as snubber circuits, motor control, and as a clamping diode.The working principle of GP10-4007EHE3/73 is based on the principles of rectification. When an alternating current (AC) waveform is applied across its two terminals, the compressed part of the waveform is blocked, while the expanded part passes through its junction. This effectively allows for current to flow in only one direction. The device can also be used in reverse, such that it blocks the expanded waveform, and allows for the compressed waveform to pass through. As such, current only flows in one direction, effectively rectifying the waveform.

Construction

GP10-4007EHE3/73 is constructed using a planar celled die structure, made up of a body, emitter, and anode terminal. This structure allows for efficient heat spreading and easy mass production. The device has a temperature rating of -40 to +125 degrees Celsius, making it suitable for use in a variety of applications and environments. The package used for GP10-4007EHE3/73 is a small thermally enhanced Dual-In-Line package (DIP). Such packages are used in order to minimize size and cost, while still maximizing the performance of the device. The device also has a low profile package, allowing for its use in tight spaces.

SummaryThe specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description