GP10MHM3/73

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

GP10MHM3/73 is a diode from a wide range of devices which falls under the category of Rectifiers - Single. It is a single phase silicon bridge rectifier according to the type of the device. It belongs to the family of diodes known as ultra fast recovery rectifiers. Diode’s are devices which allow for current to flow in one direction and prevent it from passing through it in the opposite direction with an intentional non linear voltage – current characteristics. GP10MHM3/73 is a very sensitive diode and can handle high current up to 10A and provides an average forward rectified current of 3A.

Application Field

GP10MHM3/73 has a wide range of application fields where it can be integrated. It is used in AC/DC power supplies as a measured type of rectifier. It is specifically designed for use in switch-mode power supplies, Uninterruptible Power Supplies, converters, inverters, and electronic ballasts.

This diode is also used in other applications such as steppers motors, large lamps, photocopying equipment, car audio systems, small portable televisions, electrical home appliances and other similar applications.

Working Principle

The working principle of GP10MHM3/73 is based on the concepts of electrical circuits. When AC is applied to it, a reverse bias voltage is produced in the diode and no current passes through it. When a forward bias is applied, the diode turns on, conducting current in the forward direction and subsequent rectification of the AC voltage takes place.

The diode\'s design helps regulate the flow of current and facilitates efficient energizing of the motor. When the input voltage is more than 0.7V, the diode starts to respond and act as a bridge rectifier. It performs very well at higher forward voltages up to 1000V with a reverse voltage of 100V.

The GP10MHM3/73 is designed to minimize the amount of power lost due to heat dissipation and loss in the diode. It has a switching time of less than 25 nanoseconds. This makes it suitable for use in high speed switching applications.

Advantages

GP10MHM3/73 has several advantages over other rectifier devices. Firstly, it is a highly sensitive device with low forward voltages and high forward current rating. Secondly, it has a low reverse voltage drop, resulting in low power dissipation and maximum efficiency. Thirdly, it has a low forward voltage drop. This improves the power factor and reduces power loss. Finally, it is a fast acting diode with a fast switching time.

The GP10MHM3/73 is an ideal rectifier for applications requiring fast switching and high efficiency. The device is well suited for a wide range of AC/DC power supplies, Uninterruptible Power Supplies, converters, inverters, electronic ballasts and other applications.

The specific data is subject to PDF, and the above content is for reference