IL410-X001

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The IL410-X001 is a 4-pin through-hole optoisolator with a triac output that is designed for applications in voltage fields ranging from 3.4 V to 34 V. This optoisolator provides an electrical isolation of 2,500 V and is suitable for inductive, inductive coupled, and resistive loads. It is a highly reliable and low-cost optoisolator that is widely used in motor control, lighting control, and other motor applications.

The IL410-X001 optoisolator has a built-in triac that provides a high-speed response time, up to 20 KHz, and is capable of switching loads up to 2 A. This optoisolator is designed to operate in various ambient temperature conditions, ranging from -40 °C to 85 °C. It also has an enhanced creepage distance of 11 mm and isolation of 4,000 Vrms.

The working principle of the IL410-X001 optoisolator is relatively simple. A bidirectional optical-electric transfer is used to switch the output triac in response to an input signal. The input signal is typically supplied to the optoisolator through an LED. When the LED is activated, it will emit light, which enters optically sensitive glass, and generate an electrical signal. This signal will then be amplified, and as a result, it will switch the output triac.

This optoisolator is commonly used in motor control, lighting control, and other motor applications. It is designed to be used with a variety of motors, such as electrical or air motors, and can be used to switch loads that use various voltages and different amounts of power. The IL410-X001 optoisolator is also suitable for applications where environmental protection is an important factor. It is dust-proof, water-proof, and highly resistant to impacts and vibrations.

In conclusion, the IL410-X001 optoisolator is a highly reliable, low-cost optoisolator with a triac output. It is designed for applications in voltage fields ranging from 3.4 V to 34 V, and is suitable for inductive, inductive coupled, and resistive loads. It provides an electrical isolation of 2,500 V, a high-speed response time of up to 20 KHz, and can switch loads up to 2 A. This optoisolator is used in motor control, lighting control, and other motor applications, and is suitable for applications which require environmental protection.

The specific data is subject to PDF, and the above content is for reference