IL4108-X017

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The IL4108-X017 is a type of optoisolator that is used for triac and SCR output applications. It is an isolation device that has a light emitting diode (LED) and a phototriac on the input side and a triac and SCR output stage on the output side. It provides isolation between the input and output circuits. It also provides a high level of electrical noise immunity in the system.

The IL4108-X017 isolator operates between 4.5V and 20V DC, and can switch a current of up to 1A at a voltage of up to 400V RMS or 690V peak. It also features a zero-crossing circuitry that ensures that the output switch turns on only when the alternating current input voltage reaches a predetermined level or “zero-crossing” point.

The working principle of the IL4108-X017 is as follows: the LED is connected to a DC source and triggered by a signal or an alternating current. When the LED is activated, it emits light and this light triggers the triac and SCR output stage, which in turn results in a voltage or current pulse being produced. This pulse is then transmitted to the output stage and to the load connected to it.

The IL4108-X017 isolator is well-suited for a variety of applications including industrial automation, switching of lamps and motors, and controlling of electrical appliances. It can also be used for switching power converters, controlling light dimmers, and for controlling temperatures in embedded systems, among others. It is an inexpensive and reliable solution that provides high reliability, low cost, and excellent isolation.

The IL4108-X017 has a wide range of features that make it suitable for use in a variety of applications. It has both zero-crossing and non-zero-crossing options, a low minimum operating current, and a high maximum operating voltage. It also has an excellent dynamic response time and excellent noise immunity. The isolator is also highly reliable and has a long operating life.

In summary, the IL4108-X017 is an optoisolator that is used for triac and SCR output applications. It provides a high level of electrical noise immunity and its zero-crossing feature ensures that the output switch only turns on when the alternating current input voltage reaches a certain level. It is a low-cost, reliable, and highly reliable isolation solution suitable for a variety of applications including industrial automation, switching of lamps and motors, and controlling of electrical appliances.

The specific data is subject to PDF, and the above content is for reference