IL4108-X006

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Optoisolators provide electrical protection against noise and isolation between circuits. The IL4108-X006 is a compact, packaged optoisolator with an Triac, SCR output. It has applications such as air conditioning systems, tel/epabx equipment, HVAC equipment, home appliances, switch mode power supplies, motor control, lighting control, contactors, DC motors and AC motors.

The IL4108-X006 operates on the principle of optocoupler isolation, which utilizes an optical light path to achieve electrical isolation between two circuits. An LED, placed inside of the optoisolator, emits light when an electrical signal is sent to it. On the other side of the optoisolator, a photosensitive element, such as a phototransistor or photodiode, converts the light signal into an electrical signal. This electrical signal is then used to control a circuit, providing electrical isolation from the other circuit.

The IL4108-X006 optoisolator features Triac and SCR output. The Triac is an semiconductor device used to control an AC power circuit. It has two main terminals, the anode and the gate, which are connected to the power circuit and the optoisolator respectively. The SCR, or silicon controlled rectifier, is a three-terminal semiconductor device that is commonly used to control DC power circuits. The SCR can either work as a switch, turning a DC circuit on and off, or as a dimmer, controlling the amount of power delivered to an electrical device. The IL4108-X006 optoisolator features two output terminals, the anode and the cathode. The anode is connected to the power circuit and the cathode is connected to the optoisolator. This allows the optoisolator to be used in applications such as lighting control, where the user can adjust the amount of power being delivered to the light.

The IL4108-X006 is designed to be a compact package, which is advantageous for applications where space is limited. The package size is only 6 x 6 x 13 mm, making it ideal for small applications such as automotive and home appliances. It is also designed with a high isolation voltage of 3.75 kV, making it suitable for high-voltage applications. Additionally, the device is rated for up to 215 °C, making it suitable for high-temperature applications.

The IL4108-X006 optoisolator is an ideal cost-effective solution for applications requiring electrical isolation and Triac or SCR output. Its compact design and high insulation voltage make it ideal for a variety of electronic applications. The IL4108-X006 optoisolator is available in through-hole or DIP as well as surface-mount packages, making it suitable for a wide range of applications.

The specific data is subject to PDF, and the above content is for reference