ISL6207CB-T

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

ISL6207CB-T is an integrated gate driver, which belongs to the category of power management integrated circuits (PMICs). It is usually used in motor control, servo drives and inverter control systems. It is a single channel, full-bridge MOSFET driver that is suitable for high-side and low-side MOSFETs. ISL6207CB-T is designed to provide the necessary logic and drive signals for various motor control systems. It integrates an advanced, low voltage power stage, as well as high current gate drive, to support high frequency operation up to 6MHz PWM input.

At the core of the ISL6207CB-T are six transistors that are configured as two half-bridge MOSFET drivers. These drivers have independent logic control inputs and independent power outputs. The logic control inputs allow the user to control the two separate outputs independently. The six transistors are designed with low-power CMOS technology and are optimized to provide high-current output with reduced gate charge.

The ISL6207CB-T is controlled by three logic control pins: enable, independent and synchronous enable. The enable pin is used to enable or disable the output driver and the independent enable pin is used to select between two high-side and two low-side outputs. The synchronous enable pin is used to enable or disable the synchronization to the input signal.

The ISL6207CB-T also includes a slew rate control input for adjusting the speed of the MOSFET transition times. This feature allows the system to reach its maximum level of efficiency and reduce switching losses.

In addition to the logic control pins, ISL6207CB-T has a couple of extra features that help improve the performance of motor control systems. The high current output is designed to drive capacitive loads up to 10uf, making it ideal for driving large MOSFET gates. Furthermore, the positive temperature coefficient (PTC) under-voltage lockout (UVLO) protects the circuit from high currents and over-voltages. Lastly, the selectable hysteresis on the UVLO input should be used when voltage dipping is observed in the system.

The ISL6207CB-T is ideal for motor control systems because it provides current amplification and over-current protection. The current amplification feature allows for more torque to be achieved with less current consumption for a given motor load. Additionally, the over-current protection circuit monitors the output current and will shut down the circuit if the current reaches a predetermined level.

The ISL6207CB-T is also designed to reduce audible noise in motor control systems. It provides a slew-rate control input to adjust the transition times of the output MOSFETs, which helps reduce the click and whine noise. Additionally, the PTC UVLO provides an increased level of protection against high currents and over-voltage conditions.

In conclusion, the ISL6207CB-T is a high-performance gate driver that can be used in a variety of motor control systems. It provides a current amplifier function, over-current protection and UVLO protection, as well as slew-rate control and noise reduction. The ISL6207CB-T is an ideal device for motor control applications that require high current output and excellent performance.

The specific data is subject to PDF, and the above content is for reference