ISL6612BCBZ-T

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

ISL6612BCBZ-T is a half-bridge gate driver IC that provides both high-side and low-side gate drivers. The device is designed to drive medium-current MOSFETs and IGBTs for two-phase motor control and other applications which require medium-current drivers. It is designed to be used in off-line switch mode power supplies, ac-dc converters, dc-dc converters, hybrid electric vehicle motor drives, static switches and any other applications that require medium-current switches.

The ISL6612BCBZ-T has an integrated high-side and low-side driver and PWM comparator. The device\'s low-side driver has undervoltage lockout (UVLO) protection which prevents it from driving the low-side switch when the voltage is below a certain threshold. The UVLO threshold can be programmed with an external resistor. The device also has maximum on-time limiting which protects against short-circuit conditions by limiting the amount of time the low-side switch is on. The device also has a startup circuit which provides current to the IC through the start pin during power-up, providing a logic supply to the IC until sufficient voltage is applied to the main supply input.

The ISL6612BCBZ-T has a pulse-width modulated (PWM) comparator which is used to compare the duty cycle of the PWM waveforms generated by the microcontroller to the carrier waveform generated by the IC itself. When the duty cycle of one of the PWM waveforms is greater than the duty cycle of the other, the PWM comparator will output a logic signal which turns the corresponding switch on or off. The PWM comparator is used to compare the speed reference to the tachometer signal, and then output the appropriate gate driving signals to the low-side and high-side gate drivers depending on the speed reference.

The ISL6612BCBZ-T has an integrated high-side and low-side gate driver with pull-up and pull-down current levels that are optimized for the MOSFET and IGBTs used in two-phase motor control. The device also has a programmable dead-time which allows for adjustment of the dead-time between the high-side and low-side drive signals in order to prevent cross-conduction. In addition, the device has a clipped-resonant mode which allows the device to be used in applications where there is noise or spikes on the power supply line. The device also has a programmable current limit with a minimum current rating of 6A and a maximum current rating of 12A, allowing the device to be used in a variety of applications with different current requirements.

Overall, the ISL6612BCBZ-T is an excellent choice for a half-bridge gate driver IC that provides both high-side and low-side gate driving signals. The device is designed to be used in off-line switch mode power supplies, ac-dc converters, dc-dc converters, hybrid electric vehicle motor drives, static switches and any other applications that require medium-currents switches, making it a versatile and efficient solution for a variety of applications.

The specific data is subject to PDF, and the above content is for reference