LM2576-5.0BT

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

LM2576-5.0BT is a switching regulator specifically designed to provide over-current protection and thermal overload protection in an easy to use solution. It achieves a low quiescent current, which enables higher efficiency and better power savings. It is suitable for a variety of uses, including solar panel systems, DC motor control, and portable electronics.

An LM2576-5.0BT switching regulator uses the buck converter topology to provide an adjustable output voltage when it receives an input voltage (nominally 5V). The buck converter topology works by taking an input voltage and stepping it down to a lower, adjustable output voltage. This is accomplished by quickly switching on and off an electrical switch (usually a transistor) at a rate determined by an on-chip oscillator. The inductor that connects to the switch acts as an energy storage device and helps reduce high-frequency ripple in the output voltage. The switching frequency can be adjusted with a potentiometer located on the board for precise adjustment of the output voltage.

LM2576-5.0BT also has internal over-current and thermal overload protection to prevent dangerous levels of current being drawn by the load and to protect against thermal runaway caused by repeated shorts or overloads. In the event of a fault, the output voltage is automatically shut off to prevent any permanent damage. If the fault is corrected, the regulator then automatically resumes normal operation.

The LM2576-5.0BT switching regulator is capable of delivering up to 5A of current at the output over a wide voltage range of 3-40V. This makes it an ideal power supply for a variety of DC applications, including robotics, motor control, portable electronics and solar panel systems.

To assist with reliable design and allow for easy troubleshooting, the LM2576-5.0BT has a number of protection and diagnostic features included. The on-chip over-current protection monitors the current output and signals the controller to shut down the output voltage in the event that the current exceeds a preset limit. The thermal overload protection is also included which will shut down the output voltage if the temperature rises above a predetermined value to protect the components from thermal runaway. There is also an LED indicator which will light up if the output voltage is not within the specified range.

In conclusion, LM2576-5.0BT is an effective solution for a wide variety of DC applications from solar panel systems to DC motor control and portable electronics. It features a low quiescent current and various safety features that make the device suitable for both robust and reliable designs. Its adjustable output voltage and high current capability also make it an attractive option for a variety of design requirements.

The specific data is subject to PDF, and the above content is for reference