LM2586T-3.3

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The LM2586T-3.3 is a 3.3Volt DC-DC switching regulator from Texas Instruments. It is a high switching frequency, low dropout linear regulator, suitable for a wide range of applications such as telecom, networking, computer systems, automotive and consumer applications. This article will provide an overview of the device\'s application field, its working principle and some of its advantages over other regulators.

Application Field

The LM2586T-3.3 is suitable for a wide range of applications. It is suitable for high current loads with up to 1.5A operating current for positive and negative pins. It is ideal for applications where low noise, low ripple and low EMI are required. It is particularly useful in applications where the input voltage can vary from 7V to 45V. It can support up to 10A output current, with a maximum output voltage of 33V.

In addition to its general use for powering circuits, the LM2586T-3.3 can be used as a step-up applicator for powering small battery devices such as watches, calculators and other low-powered digital appliances. It can also be used as a step-down regulator to power circuits with higher voltage input while maintaining constant output voltage.

Working Principle

The LM2586T-3.3 operates using a self-supplied current source driving an external MOSFET. It uses a hysteretic architecture with a single resistor and CAP to determine the minimum on-time and maximum off-time of the MOSFET. The frequency of the output voltage is dependent on the value of the RES and CAP.

The output voltage is regulated by an internal, open-loop error amplifier. The error amplifier compares the output voltage to a reference voltage and adjusts the duty cycle and output voltage accordingly. At the same time, it monitors the current flowing through the MOSFET, shutting it off if the current exceeds the current limit. This feature helps protect the device from short circuit and overload conditions.

Advantages

The LM2586T-3.3 has a range of advantages over other voltage regulators. It has no minimum load requirements, meaning it can be used with low-power load applications without any issues. Its high efficiency, low quiescent current and low operating temperature make it a good choice for battery-powered applications. Its wide output voltage range and high current capability make it suitable for a variety of applications.

The LM2586T-3.3 also has an internal over-temperature protection feature that shuts off the output until the temperature is reduced. This feature ensures the device won\'t overheat and helps protect the external circuits from damage. It also has an under voltage lockout (UVLO) feature that prevents the device from turning on until the input voltage is above the threshold.

In addition to these features, the LM2586T-3.3 has a wide input voltage range, low noise, high efficiency and high current capability, making it an ideal choice for a wide range of applications.

Conclusion

The LM2586T-3.3 is a 3.3Volt DC-DC switching regulator from Texas Instruments that is suitable for a wide range of applications. It has a range of advantages over other voltage regulators, including a wide input voltage range, low noise, high efficiency and high current capability. The device also has a range of safety features, such as an over-temperature protection and an under-voltage lockout feature. With its wide range of features and benefits, the LM2586T-3.3 is an ideal choice for powering a variety of circuits and digital devices.

The specific data is subject to PDF, and the above content is for reference