LM2904VQPWRG4 Integrated Circuits (ICs)

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The LM2904VQPWRG4 is an instrumentation Operational Amplifier (Op-Amp) with a low-power feature that is used in multiple applications. It is part of the Linear family of amplifiers which provides precision amplification of signals, both electrical and optical, with low-noise and high-impedance qualities. The LM2904VQPWRG4 is designed to support both low-level and high-impedance signals with minimum noise, distortion and crosstalk. It is a four-port integrated circuit (IC) with two buffered inputs and two outputs. This functionality allows for multiple circuits to be connected to the amplifier for further amplifying and processing of the signal.

The LM2904VQPWRG4 consists of four main components, namely the Op-Amp, two buffers, and two outputs. The Op-Amp is the amplifier that provides the main amplification of the signal while the buffers serve to buffered the signal to reduce noise and distortion, allowing for cleaner amplification. The two outputs are used to drive the second network of components, such as LEDs, or other components. The LM2904VQPWRG4 operates at a voltage of 3V to 10V and is capable of being powered down to save power and extend operational life.

The LM2904VQPWRG4 contains a low-noise amplifier (LNA) and is classified as a low-power amplifier (LPA). The LNA provides a wide amplification range, a fast response time, and low distortion and noise. The amplifier also has a low-pass filter which helps reduce unwanted high-frequency signals. The low power consumption of the LM2904VQPWRG4 ensures very low power consumption, thus extending operating life. The amplifier also has protection against static electricity, current overload and short-circuit protection.

The LM2904VQPWRG4 can be used in a number of applications such as signal conditioning and amplifying. Signal conditioning is the process of pre-processing a signal before being measured or further amplified. For example, when measuring the voltage outside of a door, the signal may require a lowpass filter to reduce noise, or a highpass filter to reduce low-frequency signals. The LM2904VQPWRG4 is well suited for such applications. It can also be used for amplifying signals such as audio signals, where the LM2904VQPWRG4 can provide a high output level with minimal distortion. This can be beneficial in automotive, medical, and consumer electronics.The specific data is subject to PDF, and the above content is for reference