LT1641CS8#TRPBF

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The LT1641CS8#TRPBF is a hot swap controller integral part of power management integrated circuit (PMIC) device. It is designed for preventing the inrush current of circuit and protecting the system components when connecting power load, which is widely applied in different power supplies, especially those distributed power systems. Moreover, this controller is usually used as system reset or delay power on functions in many applications.

The Hot Swap Controllers generally provide protection against hot plugging, which is an electrical phenomenon that occurs when some electronic components are connected to power supplies while serving as an electronic load. It is because during this connection, a large current surge may cause damage of the connected components. In order to prevent such inrush current, hot swap controllers are installed in the power supply line. They not only detect such high inrush currents, but also limit and regulate them. This is achieved by monitoring the input voltage and limiting it according to the current consumption of the system.

The LT1641CS8#TRPBF is a high performance hot swap controller featuring adjustable over-temperature and over-current protection. It is composed of four separate power control blocks, each employing a current limit circuit. This set of power control blocks can provide current limiting in applications where load current increases or decreases when power is applied. It also can be used to protect device against overload, over current or over temperature.

The working principle of LT1641CS8#TRPBF is simple yet efficient. It is operated together with a shunt resistor that senses the load current. The resistor monitors the current flow from the source power supply to the load and the output voltage generated by the devices. When the current exceeds the preset limit, the voltage detected by the resistor will rise accordingly. This voltage is then used to trigger an over-current protection switch in the controller IC which will then disconnect the power supply to the load device.

Besides, the LT1641CS8#TRPBF also provides precise current monitoring and protection against over-temperature events. This is accomplished by measuring the output voltage of the device and comparing it to a pre-set temperature threshold. If the voltage measured is higher than the threshold, the controller IC will activate an over-temperature protection switch, isolating the device from the power supply to lower its temperature.

In summary, the LT1641CS8#TRPBF is a hot swap controller integral part of PMIC for application of distributed power systems, protecting components from over current, over temperature and hot plugging damage. It’s working principle of operating a current limit circuit together with a shunt resistor can monitor the source power supply to the load and output voltage generated by the devices, and when the current exceeds the preset limit, triggers the over-current protection switch to disconnect the power supply to the load device.

The specific data is subject to PDF, and the above content is for reference