LT5400BCMS8E-7#PBF

Series:	LT5400
Packaging:	Tube
Lead Free Status / RoHS Status:	--
Part Status:	Active
Moisture Sensitivity Level (MSL):	--
Circuit Type:	Isolated
Resistance (Ohms):	1.25k, 5k
Tolerance:	±15%
Number of Resistors:	4
Resistor Matching Ratio:	±0.025%
Resistor-Ratio-Drift:	±0.2 ppm/°C
Number of Pins:	8
Power Per Element:	800mW
Temperature Coefficient:	±25ppm/°C
Operating Temperature:	0°C ~ 70°C
Applications:	Voltage Divider (TCR Matched)
Mounting Type:	Surface Mount
Package / Case:	8-TSSOP, 8-MSOP (0.118", 3.00mm Width) Exposed Pad
Supplier Device Package:	8-MSOP-EP
Size / Dimension:	0.118" L x 0.118" W (3.00mm x 3.00mm)
Height - Seated (Max):	0.043" (1.10mm)

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Introduction
LT5400BCMS8E-7#PBF is a modern Resistors Network, Array PCB that fits a variety of applications in industrial and automotive industry. It can be easily integrated into various signal circuits, communication and other industrial systems. This article will discuss the application field and working principle of LT5400BCMS8E-7#PBF.

Application Field
The LT5400BCMS8E-7#PBF is widely used in many industrial applications including consumer electronics, automotive, military and aerospace. It can be used to provide power supply from a variety of sources such as direct current, alternating current and pulse width modulation (PWM), as well as in communication, industrial and automotive systems. It can also be used as a power protection device to prevent damage due to voltage surges and to reduce EMI emission.

Working Principle
The LT5400BCMS8E-7#PBF is a Resistor Network Array which consists of 10 series connected resistors of 8Ω each. The characteristic of the resistors network is determined by the total resistance of all its components. The total resistance of the network is calculated by summing up the individual resistors’ resistance. The total resistance can be higher or lower than 8Ω depending on how closely the resistors are connected.

The LT5400BCMS8E-7#PBF can be used as an overload protection device in order to prevent damage from voltage surges and power overloads. The resistors will reduce the voltage to a manageable level and safe operating voltage level thereby protecting the equipment from possible damage due to overcurrent, voltage spikes or power surges. In addition, the LT5400BCMS8E-7#PBF can provide EMI emission reduction by providing a damping resistance to the electrical noise. It also can be used for signal conditioning to smooth out any noise signals in the system.

Conclusion
In brief, the LT5400BCMS8E-7#PBF is a modern Resistor Network, Array PCB that fits a variety of applications and can be easily integrated into various signal circuits, communication, industrial and automotive systems. It has a total resistance of 8Ω and can be used for overload protection, EMI reduction and signal conditioning purposes.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description