LT8610AEMSE#PBF

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Today, power management ICs play a vital role in ensuring robust and efficient power supply, as well as optimizing battery run time. Among them, DC-DC switching regulators are a type of integrated circuits that regulate the voltage and current with integrated analog and digital control circuits. Among them, LT8610AEMSE#PBF is an advanced, high-performance, and highly integrated switch regulator. This article will introduce the application field and working principle of LT8610AEMSE#PBF.

Application Field and Characteristics of LT8610AEMSE#PBF

LT8610AEMSE#PBF is a monolithic IC designed and manufactured by Linear Technology Corporation and is a single, highly efficient, adjustable power supply solution optimized for high current applications. It features a wide input voltage range of 6 V to 80 V and is capable of providing output voltages adjustable from 2 V to 60 V with a peak effciency up to 97%.

The LT8610AEMSE#PBF integrates a mode controller, integrated gate drivers, an internal 600V MOSFET, and a 400 kHz oscillator. It is designed to drive a single N-channel MOSFET without needing external drivers, and it controls and synchronizes the output voltage by varying the switching frequency. The IC utilizes Embedded Power Programming, which combines I2C interface, analog programming, and software programming, offering designers a flexible and low-cost way to adjust the output voltage.

LT8610AEMSE#PBF is suitable for a wide range of applications, such as automotive, industrial, and consumer electronics. It is capable of operating with input voltages up to 80 V and output voltages up to 60 V with efficiency up to 97%. In addition, the product features current sensing, over-temperature protection, programmable soft start, and short circuit protection. This makes it an ideal solution for low power conversion systems.

Working Principle of LT8610AEMSE#PBF

The LT8610AEMSE#PBF is DC-DC switching regulator that utilizes a buck-boost converter topology to regulate the input voltage and output current. The buck-boost architecture uses an inductor to step up and down the input voltage to any output voltage, either higher or lower than the input voltage. The IC controls the output voltage by using pulse width modulation (PWM) to modulate the switches in the buck converter. PWM is a technique used to control the on and off switching of the power switches, allowing the converter to control the output voltage.

The design of the LT8610AEMSE#PBF architecture is cleverly designed to allow for high efficiency, even when the input and output voltages are mismatched. Compared to traditional linear regulator designs, the buck-boost architecture allows for high output current, high efficiency, and wide input voltage operation. The IC also allows for a wide range of output voltage settings by either software programming or analog input setting.

LT8610AEMSE#PBF also features an over-temperature protection circuit which monitors the die temperature and turns off the power switches if the temperature exceeds a certain threshold, protecting the device from overload or over temperature conditions. The IC also features a programmable soft start which prevents inrush current during power up. It further features a current sense circuit that senses the output current and reduces the duty cycle if the current exceeds the programmed limit.

In summary, LT8610AEMSE#PBF is a high efficiency, highly integrated switch regulator. It is suitable for wide range of applications, such as automotive, industrial, and consumer electronics, where highly efficient and adjustable power supplies are needed. It boasts an input voltage range of 6 V to 80V, and can output adjustable voltages from 2V to 60V with a peak efficiency of up to 97%. It features current sensing, over-temperature protection, programmable soft start, and short circuit protection.

The specific data is subject to PDF, and the above content is for reference