M27C322-100S1

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The M27C322-100S1 is a unit of memory that is ubiquitous in embedded systems today. It is an 8-bit parallel EEPROM - an electrically erasable programmable read-only memory. It is part of a range of memories and devices manufactured by STMicroelectronics, making it a well-recognized choice for many applications.

Essentially, the M27C322-100S1 is a non-volatile (NV) memory unit, meaning that it can store data when power is removed from the system. It can store up to 32K x 8 bits of data – or 256K bits – and has a read access time of only 45 nanoseconds (0.000045 seconds). It has an operational voltage of up to 5.5v and an access latency of two clock cycles.

The M27C322-100S1 is ideal for applications that require long data retention times, such as data logging, instrumentation, and programming systems. It is also suitable for code storage, providing a whole-in-one solution for embedded applications. It is available in a range of configurations, from memory blocks of 32K bytes to blocks of 1Mbytes.

The M27C322-100S1’s design employs a static design so that no refresh cycles are required. This also means that the EPROM is capable of operation at lower power levels, making it suitable for battery-powered applications. Furthermore, the device supports read-during-write operation, allowing the bytes to be read while the data is still being written.

The operation of the M27C322-100S1 is fairly straightforward. The unit is first accessed and then the EEPROM is written, erasing or writing data to the memory locations specified. The system then monitors the action of the EPROM, waiting for the end of the write cycle. At this point, the memory is ready to be read and/or written to again. This process can be repeated as many times as needed.

The M27C322-100S1 is constructed from an array of configurable CMOS logic, which is connected to an electrically erasable read-only memory (EPROM). Once the EPROM has been programmed, the bit array can be used to store data. The EPROM consists of an array of addresses and data cells, each of which is individually accessible to the user. Each data cell can contain 8 bits of data, which can be read, erased, or written to as needed.

The M27C322-100S1 can be used in a variety of applications, such as engineering or instrumentation, robotics, industrial control systems, and automotive systems. It is highly reliable, offering exceptional data retention, even in the most extreme temperatures and vibration levels. Additionally, it is highly secure, offering hardware protection against unintentional writes and tampering.

In summary, the M27C322-100S1 is a reliable and secure memory unit that is exceptionally well-suited for embedded applications. With a read access time of 45 nanoseconds and a wide range of configurations, it is a versatile unit that can be used in a variety of projects.

The specific data is subject to PDF, and the above content is for reference