MAX110ACWE+

Number of A/D Converters:	1
Base Part Number:	MAX110
Supplier Device Package:	16-SOIC
Package / Case:	16-SOIC (0.295", 7.50mm Width)
Operating Temperature:	0°C ~ 70°C
Features:	--
Voltage - Supply, Digital:	±5V
Voltage - Supply, Analog:	±5V
Reference Type:	External
Architecture:	Sigma-Delta
Series:	--
Ratio - S/H:ADC:	--
Configuration:	MUX-ADC
Data Interface:	SPI
Input Type:	Differential
Number of Inputs:	2
Sampling Rate (Per Second):	50
Number of Bits:	14
Part Status:	Active
Packaging:	Tube

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The MAX110ACWE+ analog-to-digital converter (ADC) is designed to offer high precision and accuracy for a variety of data acquisition and signal conditioning applications. The MAX110ACWE+ ADC offers two channels of resolution up to 16-bits, as well as gain and offset inputs for signal conditioning. The signal conditioning circuitry is programmable, allowing it to be adjusted to meet specific application needs.The MAX110ACWE+ operates in either a single-ended or a fully differential mode, and the resolution can be adjusted from 8- to 16-bits or can be fine-tuned for optimum accuracy with offset and gain adjustments. The power dissipation is low, operating at a mere 2.4W maximum. The ADC features an internal clock and internal voltage reference, as well as multiple power supply options, ranging from 6V to 16V. Additionally, the MAX110ACWE+ is supplied in a 16-pin TSSOP or 16-pin VSOP package.The MAX110ACWE+ input stage can be set to either single-ended or fully differential mode. In single-ended mode, the two channels are separately connected to ground and the input signal is applied to one channel only. In differential mode, the two channels are connected in parallel and the input signal is applied across both of them.The MAX110ACWE+ converts the analog input signal into digital code, with the resolution adjustable from 8- to 16-bits. The conversion is based on a successive approximation conversion technique. The first step is to compare the input signal to the mid-level reference voltage. If the input signal is greater than the mid-level voltage, the digital output is set to high, otherwise it is set to low. Then, the reference voltage is shifted to the high or low level and the comparison is repeated. This process is repeated until the required resolution is reached.The gain and offset settings can be adjusted via EEPROM or external potentiometers. This allows for precision signal conditioning and the ability to fine-tune the output of the MAX110ACWE+ ADC. Additionally, the MAX110ACWE+ is temperature compensated, allowing for its use in a wide range of temperatures.The MAX110ACWE+ is designed for applications such as data acquisition, industrial control, medical, embedded systems, and audio/voice processing. It is well-suited for applications that require both low power and high accuracy, such as medical instruments and process control. The MAX110ACWE+ ADC can be used with a wide range of digital signal processors, controllers, and other digital devices, making it ideal for distributed systems.In conclusion, the MAX110ACWE+ ADC is a high-precision, low-power, full-differential device that is ideal for a variety of data acquisition and signal conditioning applications. Its ability to be fine-tuned for optimum accuracy with gain and offset adjustments makes it an attractive choice for embedded systems, medical instruments, industrial control, data acquisition, and audio/voice processing applications.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description