MAX113EAG+

Number of A/D Converters:	1
Base Part Number:	MAX113
Supplier Device Package:	24-SSOP
Package / Case:	24-SSOP (0.209", 5.30mm Width)
Operating Temperature:	-40°C ~ 85°C
Features:	Selectable Address
Voltage - Supply, Digital:	3 V ~ 3.6 V
Voltage - Supply, Analog:	3 V ~ 3.6 V
Reference Type:	External
Architecture:	Flash
Series:	--
Ratio - S/H:ADC:	1:1
Configuration:	MUX-S/H-ADC
Data Interface:	Parallel
Input Type:	Single Ended
Number of Inputs:	4
Sampling Rate (Per Second):	400k
Number of Bits:	8
Part Status:	Active
Packaging:	Tube

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Data Acquisition - Analog to Digit Converters (ADC)

The MAX113EAG+ is a single channel, low power, precision, 8-bit analog-to-digital converter designed for use in data acquisition systems, industrial control, and instrumentation applications. The device features 10K samples/sec conversion rate, 8-bit resolution, input range of -2V to +2V, an integrated sample-and-hold amplifier, reference input and a TTL/CMOS compatible parallel data output. The device can be configured by two selection pins connected to the analog input; these pins allow the user to make adjustments to gain, offset and reference voltage. The MAX113EAG+ also features an internal oscillator, allowing accuracy of up to 0.01%.The MAX113EAG+ is ideally suited for battery powered applications, because it only consumes 6 mW of power when operating. It is available in a small 8 pin DIP package.MAX113EAG+ Application FieldsThe MAX113EAG+ can be used in a wide range of data acquisition applications. It is designed for applications such as industrial process control, medical instrumentation, audio recording decks and environmental monitoring.The MAX113EAG+ is designed to provide the user with maximum flexibility when used in application designs. The device features a variety of input ranges from -2V to +2V and higher resolution modes of operation. The input ranges for the MAX113EAG+ can either be fixed or variable depending on the user\'s needs.MAX113EAG+ Working PrincipleThe MAX113EAG+ works by converting an analog signal into a digital output. The analog input is converted to a digital signal using a delta-sigma technique. This technique works by taking a voltage input, known as the input voltage, and passing it through a switched capacitor array. The clock pulse triggers this switched capacitor array to sample the input voltage and convert it into a binary code.The resulting binary code is then decimated and converted into an 8-bit digital code, which is then sent to the output pins as a parallel TTL/CMOS output. The MAX113EAG+ uses two-step delta-sigma data conversion, meaning that it performs two gains of digital-to-analog conversion before the conversion is complete. This technique enables the device to operate with fewer clock cycles, allowing the device to convert data with a maximum sample rate of up to 10K samples/sec. The MAX113EAG+ also features an integrated temperature compensation circuit, allowing it to maintain accuracy over a range of temperatures.ConclusionThe MAX113EAG+ is a single channel precision ADC device offering flexibility and accuracy for data acquisition applications. It features a variation of input ranges, up to 8-bit resolution, a sample rate of up to 10K samples/sec, an integrated temperature compensation circuit and low power consumption making it an ideal choice for low power applications.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description