MAX121CWE+

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Data Acquisition - Analog to Digital Converters (ADC)

The MAX121CWE+ is a low power, single-supply, 12-bit, successive approximation analog-to-digital converter (ADC), used for analog signal conversion in a wide variety of applications. This device includes an on-chip track-and-hold amplifier and an input voltage range of ±5V, allowing it to operate with any signal-voltage swing and power supply range.

The ADC is primarily designed for applications where accuracy and speed are essential, such as data acquisition systems, instrumentation, medical, and industrial control systems. The MAX121CWE+ is ideal for applications where charge-injection issues typically limit other ADC technologies, such as automotive, process control, and closed-loop Systems. It is designed with ±0.1% guarantee, without external calibrations. This device also features power-down and sleep modes, allowing for minimum power consumption when making periodic, infrequent conversions. The operating temperature range from -40°C to +85°C and the small packaging makes this device suitable for various environmental conditions.

Application Field for MAX121CWE+

The MAX121CWE+ is useful for many applications, due to its wide input range and power-down feature. The ADC is most often used in applications that require high accuracy, speed and low power consumption such as:

• Data acquisition systems
• Process/industrial control systems
• Instrumentation
• Medical equipment
• Automotive systems
• Environment monitoring systems

Working Principle of MAX121CWE+

The working principle of the MAX121CWE+ is conversion of analog signals into digital signals. It uses successive approximation register (SAR) technology, which eliminates the need for thermocouple based measurements or multiple reference voltage sources. The analog voltage is presented to the ADC and converted to digital form, then it can be captured by a digital processor or digital logic circuit. The ADC uses a Charge Balancing technique to convert the analog input into digital form, which is based on voltage division, then the digital output is computed using a ratio of 2n internal bits. This technique is used in many other applications like temperature to digital conversion.

The operation of the ADC can be divided into three different phases - initial conversion phase, digital conversion phase, and output storage phase.

The initial conversion phase is used for measuring and storing the analog voltage. Here, the analog voltage is first analyzed by a successive approximation register (SAR) logic circuit. The logic circuit then determines the output bits that should be stored. In the digital conversion phase, the SAR circuit makes a decision regarding which bits should be converted to digital form. The final phase, the output storage phase, stores the digital data in registers. These register values are read by the processor as output value.

The ADC works best when it is supplied with a constant voltage margin, as it benefits from noise immunity, low power consumption, and higher accuracy. Its ability to work without external calibration makes it very desirable for many applications. Its wide input voltage range, low power mode, and small form factor makes it suitable for a variety of applications.

The MAX121CWE+ is an ideal analog to digital converter for any application where accuracy, speed and low power consumption are important. Its low power consumption, wide input voltage range, small form factor and wide temperature range make it suitable for a wide variety of applications.

The specific data is subject to PDF, and the above content is for reference