MAX1281BCUP+

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The MAX1281BCUP+ is a fast, low power, precision analog-to-digital converter (ADC) from Maxim Integrated. It is designed for use in portable and battery-powered applications. The MAX1281BCUP+ has a high sampling rate, low power consumption and fast conversion times, making it suitable for applications such as waveform analysis, medical imaging, remote sensing, and data acquisition.

The MAX1281BCUP+ features 16-bit resolution, a dynamic range of up to 94 dB, and a maximum sampling rate of 200MSPS. It has integrated charge injection calibration and programmable on-chip functions such as low power modes, external reference selection, and on-chip sampling rate control. The ADC also supports an SPI (Serial Peripheral Interface) interface for control and data transfer, and synchronous operation with 1-4 channels for up to four channel multiplexing.

In terms of power consumption, the MAX1281BCUP+ supports 0.87 mW/CPU at 200MSPS, 1.2 mW/CPU at 500MSPS, and 2.1 mW/CPU at 1GSPS. This low power consumption makes it suitable for battery powered applications. The ADC also features a low power idle mode and low power sleep mode, where the conversion rate can be reduced to save power. Additionally, the ADC has integrated internal temperature compensation, which helps to reduce power usage.

The MAX1281BCUP+ is designed for use in a wide range of applications, such as signal processing, waveform analysis, medical imaging, scientific experimentation, data acquisition and remote sensing. It can be used in applicationss such as ultrasound imaging, thermography, seismic data acquisition, and signal processing. In addition, the MAX1281BCUP+ is used in communications applications such as wireless networking, CDMA, GSM and WiFi transceivers, wireless LANs, and mobile phones.

The MAX1281BCUP+ works on the principle of successive approximation register (SAR) analog-to-digital conversion. The ADC converts an analog signal into a digital representation by using an iterative process in which each bit of the digital output is determined by comparing the analog input with a reference voltage. After the initial bit is obtained, the reference voltage is adjusted accordingly and the process is repeated until all the bits of the digital output are obtained. Once the conversion is completed, the digital output is read out of the ADC.

In summary, the MAX1281BCUP+ is a precision analog-to-digital converter from Maxim Integrated with a high sampling rate, low power consumption and fast conversion times. It is suitable for a wide range of applications including signal processing, waveform analysis, medical imaging, scientific experimentation, data acquisition and remote sensing. It operates on the principle of successive approximation register (SAR) analog-to-digital conversion.

The specific data is subject to PDF, and the above content is for reference