MAX174BEPI

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Analog to Digital Converters (ADCs) are an important part of data acquisition, and for many applications, an accurate and fast conversion from analog to digital domain is necessary. The MAX174BEPI from Maxim Integrated is an integrated circuit (IC) designed for high-speed, 12-bit, low-power data acquisition applications. This article provides an overview of the MAX174BEPI’s application field, operation principle, and performance.

Application fields of MAX174BEPI

The MAX174BEPI IC is a low-power, 12-bit, Successive Approximation Register (SAR) Analog-to-Digital Converter (ADC) designed specifically for portable applications. It is suitable for a range of data acquisition applications in wireless communications and RFID, medical and industrial automation, and automotive and battery-powered systems. It is capable of providing 12 bit resolution with an effective sampling rate of around 750 kSamples/sec. The power supply range can be extended to many automotive and battery-powered supply ranges, making it suitable for a range of mobile and portable applications. Moreover, it supports a wide range of communication protocols such as I2C, SPI, and UART.

Working Principle

The MAX174BEPI is based on a SAR architecture that is ideal for low-power and high-speed applications. It has an on-chip track and hold circuit that captures analog signal into the integrated circuit at the moment of an A/D conversion. The ADC employs a 2-step conversion process, which is known as "dual sampling". In the first step, the sampled voltage is compared to the midscale voltage (Vref=Vcc/2), and in the second step it is compared to the remaining voltage range within the selected resolution. At each step, the measured voltage is adjusted to the closest value out of 8 possible levels. In this manner, the actual output digital code is determined.

Performance

The MAX174BEPI feature excellent performance characteristics, including a high degree of linearity, low power consumption, a wide supply range (from 1.7V to 5.5V), and low noise. It also has a low intrinsic offset, low intrinsic gain error, and high AC performance. The best INL and DNL values can be achieved with proper calibration, and the maximum conversion rate can reach up to 750kSamples/second.

The MAX174BEPI also provides a variety of features to reduce system power consumption. The integrated power-down feature decreases the power consumption from up to 90mW to less than 10µW. It also supports ‘burst mode’ operation, which allows for lower power consumption during continuous instruction stream operation. Additionally, the device can be put into ‘power sleep mode’ when the ADC is not being used, which reduces the power consumption from up to 10mW to 50µW.

Conclusion

The MAX174BEPI is an ideal choice for data acquisition applications that are both high speed and low power. It combines a wide range of modern features to provide good performance and low power consumption. The MAX174BEPI is suitable for a variety of data acquisition applications in wireless communications, medical, industrial automation, and automotive and battery-powered systems.

The specific data is subject to PDF, and the above content is for reference