MAX186BEPP

Number of A/D Converters:	1
Base Part Number:	MAX186
Supplier Device Package:	20-PDIP
Package / Case:	20-DIP (0.300", 7.62mm)
Operating Temperature:	-40°C ~ 85°C
Features:	--
Voltage - Supply, Digital:	±5V, 5V
Voltage - Supply, Analog:	±5V, 5V
Reference Type:	Internal
Architecture:	SAR
Series:	--
Ratio - S/H:ADC:	1:1
Configuration:	MUX-S/H-ADC
Data Interface:	SPI
Input Type:	Differential, Single Ended
Number of Inputs:	4, 8
Sampling Rate (Per Second):	133k
Number of Bits:	12
Part Status:	Active
Packaging:	Tube

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Data Acquisition - Analog to Digital Converters (ADC)

Analog to Digital Converters (ADCs) are used to convert analog signals into digital ones. An ADC must be able to convert the analog signals in a way that accurately reproduces them in a digital format. This allows for the transfer, analysis, and storage of the signals in a computer. One example of an ADC is the MAX186BEPP.The MAX186BEPP is a high-speed, 8-bit, SAR (successive approximation register) analog-to-digital converter. It is designed to provide a high resolution, wide dynamic range of 8-bit resolution. The Maximal 186BEPP has low power consumption, very fast conversion speeds and a low-noise and wide input range. It is suitable for applications such as data and telecommunications, medical imaging, factory automation, and industrial process control.The MAX186BEPP is a single-channel device, with a conversion depth of 8-bits, and a maximum input range of ±5V. It can operate from supply voltages that range from 4.75 to 5.25V. It is capable of achieving conversion rates of up to 500ksps over a single-ended input range. Its features and performance make the MAX186BEPP suitable for a wide range of applications.The MAX186BEPP works on the principle of successive approximation to convert analog signals into digital ones. It is designed to convert analog signals into 8-bit digital results within a maximum conversion time of 500 XS.The process of conversion begins with the analog input signal being sampled, which is then fed into the analog-to-digital core of the MAX186BEPP. The core then stores the sample in its internal memory and compares it with the reference voltage. The difference between these two values is then calculated and the result of this calculation is then stored in the internal registers.Once the calculation is complete, the core can then output the digital result and the process begins again, until it has been repeated numerous times. The result of the calculation is an 8-bit digital value, which is then sent out of the IC. This value can then be used to represent the analog input signal.The MAX186BEPP is a very useful tool for data acquisition and conversion due to its high accuracy and wide range. Its flexibility and low power consumption also make the MAX186BEPP suitable for a wide range of applications.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description