MAX3085ECPA+

Series:	--
Packaging:	Tube
Part Status:	Active
Type:	Transceiver
Protocol:	RS422, RS485
Number of Drivers/Receivers:	1/1
Duplex:	Half
Receiver Hysteresis:	100mV
Data Rate:	500kbps
Voltage - Supply:	4.75 V ~ 5.25 V
Operating Temperature:	0°C ~ 70°C
Mounting Type:	Through Hole
Package / Case:	8-DIP (0.300", 7.62mm)
Supplier Device Package:	8-PDIP
Base Part Number:	MAX3085

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Introduction to MAX3085ECPA+

The MAX3085ECPA+ is an ultra-low-power, programmable, multirange (3.3/4.4/5.5/6.0 V) RS-485/RS-422 transmitter/receiver. This device is capable of operating from a wide range of supply voltage (2.0 to 5.5 V), while maintaining the full-duplex communication in the presence of an up to 10 kV ESD HBM on the bus lines.The MAX3085ECPA+ consists of a configurable transmission speed, extended common-mode voltage range, integrated transient voltage protection, auto-disable feature, and a half-duplex mode with a bus-idle detector. This device supports a high operating speed up to 3.2 Mbps with a low quiescent current of 0.9µA and peak current 750µA. The integrated protection circuits support high-temperature operation up to +125 °C and static discharge (ESD).

Application Field of MAX3085ECPA+

The MAX3085ECPA+ is specifically designed for the low-power embedded systems and distributed sensor networks. The device is ideal for point-to-point, multi-point and bus topologies in various applications such as industrial automation, healthcare and office/home automation, fire alarm systems, traffic control and monitoring, automotive, aerospace and railway communication systems.The device can be used in almost any application where reliable bidirectional communication is required. Using the features of the MAX3085ECPA+ transmitter/receiver, the applications are cost-efficient and designed to reduce the overall power system usage. The device’s efficient power supply is perfect for low-power systems and is integrated with the auto-disable feature, which reduces system power even further. It is also easy to use, as no external line termination is required and the data communication is independent of operating voltage range.

Working Principle of MAX3085ECPA+

The MAX3085ECPA+ is designed to serialize incoming data and transmit it over a serial communications link such as the RS-485/RS-422. The device consists of the transmitter, receiver, and a half-duplex mode.The transmitter sends data over a communications link with a serial output. It supports various data formats, such as 8 bits, 16 bits, and 20 bits. The device also supports various transmission speeds and signal polarity.The receiver receives data from the serial communication link with a serial input. It supports various data formats and signal types with signal detection threshold of 1/4Vcc to 5/4Vcc and signal sampling delay time of 13 ns.The half-duplex mode supports a bus-idle-detection feature. This feature detects the bus-idle condition and sends an enable signal to the transmitter, so the transmitter can enter into an enable state in order to transmit the data.In addition, the device features improved common-mode transient immunity, integrated transient voltage protection, and support for an up to 10 kV ESD HBM on the bus lines. These features allow the MAX3085ECPA+ to support a robust and reliable communication system in a variety of environments.

Conclusion

The MAX3085ECPA+ is an ideal device for the low-power embedded systems and distributed sensor networks. It is specifically designed for point-to-point, multi-point, and bus topologies and provides a wide range of features such as extended common-mode voltage range, integrated transient voltage protection, auto-disable feature, and a half-duplex mode with a bus-idle detector. The device is designed to reduce the power consumption of the system and provide reliable bidirectional communication. It is perfect for applications such as industrial automation, healthcare and office/home automation, fire alarm systems, traffic control, and monitoring. Overall, the MAX3085ECPA+ is an excellent choice for any application where reliable communication, low power consumption, and robust operation are required.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description