MAX3224EAP+

Series:	--
Packaging:	Tube
Part Status:	Active
Type:	Transceiver
Protocol:	RS232
Number of Drivers/Receivers:	2/2
Duplex:	Full
Receiver Hysteresis:	500mV
Data Rate:	250kbps
Voltage - Supply:	3 V ~ 5.5 V
Operating Temperature:	-40°C ~ 85°C
Mounting Type:	Surface Mount
Package / Case:	20-SSOP (0.209", 5.30mm Width)
Supplier Device Package:	20-SSOP
Base Part Number:	MAX3224

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

MAX3224EAP+ is an integrated switching and linear regulator that is designed to power 3V to 5.5V systems from USB, adapter, or battery-powered supplies up to 10V, while providing up to 900mA of output current. This device integrates a three-channel regulated, low-dropout linear regulator that provides ±2% precision output, a 5V step-up DC/DC converter, and a linear regulator to generate 5V VBat supply—all on a single chip. The MAX3224EAP+ also cancels input bulk capacitors for noise reduction, which also supports the whole system, including switching and linear regulators, and can be controlled by a single enable pin or I2C interface.MAX3224EAP+ falls under the category of interface components - namely, drivers, receivers, and transceivers - which provide a communication link between systems. When it comes to drivers, the MAX3224EAP+ can provide power to and control a wide range of system interfaces, including but not limited to bus transceivers, SRAM, SRAM buffer, and power mux. For receivers, the MAX3224EAP+ can be used to detect and condition input signals, such as USB and adapter port signals. Finally, the integrated linear regulator and 5V step-up DC/DC converter provide an excellent choice for transceivers, handling both data and power in a single, low-cost package.The MAX3224EAP+ consists of a three-chip power management system that supports both 5V and 3.3V power rail packages. This system uses a switching converter to provide power up to 10V, a three-channel regulated low-dropout linear regulator to provide ±2% precision output, and a linear regulator to generate 5V VBat supply.The main components of the MAX3224EAP+ are the switching regulator, linear regulator, and USB regulator. The switching regulator works on the principle of Pulse Width Modulation (PWM). It is used to convert input signals such as adapter and battery voltages into a regulated output voltage for the 3V to 5.5V system. The linear regulator, on the other hand, works on the principle of linear regulation, where the output voltage is dependent on the feedback voltage. The USB regulator is a boost regulator that works on the principle of charge reversal, allowing the output voltage to be adjusted by changing the reference voltage.The MAX3224EAP+ also features integrated switch ON/OFF control pins. These enable pins can be used to control the enable/disable states of the integrated regulator and switching regulator, allowing flexibility in system design. Additionally, the device has an integrated I2C interface that can be used to program the device settings and monitor the device\'s current state.Finally, the MAX3224EAP+ features an external voltage sense pin that can be used to provide additional current regulation accuracy and allows the systems operating voltage to stay within the specified limits. It also supports a disable/enable logic pin that can be used to quickly turn the device off and on.Overall, the MAX3224EAP+ is an excellent choice for powering 3V to 5.5V systems from USB, adapter, or battery-powered supplies. Its integrated switching and linear regulator make it ideal for interfacing, receiving, and driving data and power in a single, low-cost package. Its integrated components make it a very reliable and cost-effective choice for applications.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description