MAX3232EEPE+

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The MAX3232EEPE+ is an interface device used to convert two channels of RS-232/EIA-232 communication lines to and from the lower power, voltage and logic levels of TTL or CMOS circuitry. It is capable of operating from low power TTL logic levels between +3.0 and +5.5 volts to and from RS-232/EIA-232 levels of ±3 volts. This interface is typically used to allow the integration of low-cost personal computers with older RS-232/EIA-232 compatible devices. The MAX3232EEPE+ is a member of a family of ICs designed to provide an economical data communication solution for a variety of interface applications.

The MAX3232EEPE+ is a full-duplex transceiver, meaning that it can transmit and receive on both channels at the same time. It also has integrated protection circuitry for each line, eliminating the need for extra line-termination components. It is capable of supporting data transmission rates from 1 Kbps up to 128 Kbps, and comes in a small 8-pin DIP package. It can operate with +3.0 to +5.5V logic levels, and is compatible with industry standard 24mA CMOS and TTL logic inputs.

The MAX3232EEPE+ is a low-power, low-voltage transceiver designed to reduce the power dissipation of an interface circuit. The integrated low-power receivers enable it to operate at low voltages of 3.0 to 5.5V while supporting a wide data rate range of 1 to 128 Kbps. The device eliminates the need for an external RS-232/EIA-232 driver, allowing it to achieve the same high levels of electrical and EMI performance with half the power consumed by a traditional RS-232/EIA-232 transceiver.

The MAX3232EEPE+ features a low-power, low-voltage design that eliminates the need for additional external components. The integrated low-power receivers allow it to support data rates from 1 Kbps to 128 Kbps without the need for external drivers or line terminations. It also minimizes the power dissipation of an interface circuit.

The MAX3232EEPE+ utilizes a four-wire full-duplex communications interface. This allows it to send and receive serial data on the same interface. The transmitter and receiver are both TTL/CMOS compatible, allowing them to be operated in both asynchronous and synchronous modes. The device also includes an integrated voltage regulator that provides 5V power supply and 7V/8V bias voltage. This ensures that it remains compatible with any standard RS-232/EIA-232 device.

The MAX3232EEPE+ is a fully integrated, low-power, low-voltage transceiver designed to reduce the component count and power consumption of an interface circuit. It is a full-duplex transceiver, meaning it can transmit and receive data simultaneously. It is capable of supporting data transmission rates from 1 Kbps to 128 Kbps, and operates from 3.0 to 5.5V logic levels. It is also compatible with industry-standard CMOS and TTL logic levels, making it an ideal choice for interface applications. With its integrated protection circuitry and small package size, the MAX3232EEPE+ is an economical and effective solution for interfacing RS-232/EIA-232 devices with low-power systems.

The specific data is subject to PDF, and the above content is for reference