MAX3243ECRHBR

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The MAX3243ECRHBR is an advanced, versatile, bidirectional bus transceiver with integrated voltage-level shifting. It is designed to work reliably across widely varying supply levels and with varying interface logic voltages, making it ideal for use in any RS485 or RS422 applications where there is an interface between two power domains with widely different voltage levels. The MAX3243ECRHBR is able to run on a wide input voltage range, typically 0.9V to 5.5V, and drive signals across the full range of 3.3V, 5V and even higher voltages using just a single 5V supply.

The transceiver is capable of transferring downstream data at speeds up to 10 Mbps and upstream data at rates up to 1 Mbps. The device is also capable of split-supply operation, enabling the low (VLS) and high (VLT) voltage sides to be powered by different supplies. The MAX3243ECRHBR also includes a slew-rate-limited differential output that reduces EMI/RFI emissions to reduce the risk of interference with nearby radio and telephone equipment.

The heart of the MAX3243ECRHBR is its bus transceiver. It is designed to isolate two bidirectional buses with compatible logic levels from one another and provide full-duplex connectivity. The bus transceiver allows data to flow in either direction over the interface and is used to translate logic levels between different power domains. The transceiver is controlled by a differential enable line (DEL) which can be driven low to disable both transmitters, or high to enable them. An active-low fail-safe feature ensures that the receiver remains in a high-impedance state if the transmitters are disabled.

The transceiver also supports integrated voltage-level shifting, meaning that it is capable of driving signals both above and below the bus voltage, making it ideal for any application that needs to bridge the voltage gap between different power domains. The integrated voltage-level shifter includes built-in buffer amplifiers and is capable of running at rates up to 10 Mbps. The MAX3243ECRHBR also offers slew-rate limiting, which helps to reduce EMI/RFI emission and reduce the risk of interference with nearby radio and telephone equipment.

The transceiver is designed for use in any RS485 or RS422 application where two separate power domains need to be connected. It is ideal for applications that require high speed differential data transfer, such as USB, IEEE 1394, and SCSI applications. The device measures only 8-pin SOT-23 and is RoHS-compliant, and is compatible with a wide variety of logic families, including CMOS, TTL, and LVCMOS. With its small size and low power operation, the MAX3243ECRHBR is perfect for use in applications that require small size and low power operation, such as handheld and portable electronics.

In addition to its advanced transceiver and voltage-level shifting capabilities, the MAX3243ECRHBR includes several other features to enhance its performance. An enhanced noise and vibration immune failure-safe feature ensures that the receiver will remain in a high-impedance state if the transmitters are disabled. The device also contains integral ESD protection to guard against electrostatic damage, and it is designed to be immune to input glitches that may occur on power-up. The MAX3243ECRHBR also includes a 60 ns propagation delay to ensure a quick and accurate data transfer.

The MAX3243ECRHBR is a versatile, advanced, bidirectional bus transceiver that is perfect for use in any RS485 or RS422 application. It is capable of transferring downstream data at speeds up to 10 Mbps and upstream data at rates up to 1 Mbps, and is able to bridge the voltage gap between different power domains using a single 5V supply. The transceiver also includes slew-rate-limiting, integrated voltage-level shifting, active-low fail-safe, and integral ESD protection, making it an ideal choice for any application in which high speed data transfer and low power operation are required.

The specific data is subject to PDF, and the above content is for reference