MAX3386EEUP

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The MAX3386EEUP is an integrated line transceiver compliant with the RS-485 and RS-422 industry standard. It is based on high-speed, low-power CMOS technology, providing half-duplex communication at data rates up to 25 Mbps. The device contains two drivers, two receivers, a programmable signal attenuator, ESD protection, and a thermal shut-down feature. The signal attenuation range is 0db to -15db, providing maximum signal quality under varying signal conditions.

The MAX3386EEUP operates in both the RS-485 and RS-422 standard modes, allowing the device to be used in a variety of network topologies. In addition, the device includes a programmable receiver threshold, allowing it to be used in multipoint networks. The device also includes a thermal shut-down feature which protects the device in the event of an over-temperature condition. This feature is enabled by connecting an external PTC thermistor.

Application Fields

The MAX3386EEUP can be used in a variety of applications, including industrial networks, instrumentation and control systems, motor drives, and motion control systems. It is also suitable for use in point-to-point, multipoint, and daisy-chain networks. The device is also suitable for use in harsh environments, with it\'s ESD protection and thermal shut-down features providing reliable operation.

Working Principle

The MAX3386EEUP operates as a differential line transceiver. The two drivers are configured to transmit 2-ma and 4-mA currents, allowing for full-duplex communication over a twisted-pair, shielded cable. The two receivers are configured to detect three input line levels, allowing them to detect data transmissions from either direction. The device also includes a programmable signal attenuator, allowing it to be used in a variety of network topologies.

When the device is enabled, the drivers are actively driven and the receivers are active. When the device is disabled, the drivers are disabled and the receivers are in a high-impedance state, allowing the bus to be in a tri-state condition. The device includes an enable pin, allowing the device to be enabled or disabled as needed.

The device contains two programmable receivers, which can be configured to detect a variety of input levels. The programmable gain block in the center of the device allows for the reception of either positive or negative signals, allowing for simple two-wire or four-wire communication. The device also contains a programmable rise-time control block, allowing for finer control of the signals.

In addition to the two programmable receivers, the device also contains an internal thermal shut-down feature. When an over-temperature condition is detected, the thermal shut-down feature will disable the device, providing protection from potential damage due to overheating. The device also includes a variety of other features, such as ESD protection, EMI suppression, and slew rate control.

Overall, the MAX3386EEUP is a high-speed, low-power line transceiver, providing full-duplex communication over twisted-pair, shielded cables. The device is suitable for use in a variety of applications, including industrial networks, instrumentation and control systems, motor drives, and motion control systems. The device\'s programmable features, ESD protection and thermal shut-down features ensure reliable operation and system protection.

The specific data is subject to PDF, and the above content is for reference