MAX3454EEUD+

Series:	--
Packaging:	Tube
Part Status:	Active
Type:	Transceiver
Protocol:	USB 2.0
Number of Drivers/Receivers:	1/1
Duplex:	Half
Receiver Hysteresis:	250mV
Data Rate:	12Mbps
Voltage - Supply:	1.65 V ~ 3.6 V
Operating Temperature:	-40°C ~ 85°C
Mounting Type:	Surface Mount
Package / Case:	14-TSSOP (0.173", 4.40mm Width)
Supplier Device Package:	14-TSSOP
Base Part Number:	MAX3454E

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Introduction

The MAX3454EEUD+ is a low voltage level and voltage level shifter family that is widely used in a variety Interface - Drivers, Receivers, Transceivers applications. This article will provide an overview of the application field of the MAX3454EEUD+ and its working principle.

Application Field

The MAX3454EEUD+ is a family of single low voltage level and voltage level shifters designed for Interface - Drivers, Receivers, Transceivers applications. It is suitable for use in low voltage and high speed applications. With its integrated internal control logic, it delivers the full robustness and performance of an external interface device.The MAX3454EEUD+ is capable of providing a low voltage interface that is compatible with both 5V and 3.3V interfaces. It is ideal for interfacing with 5V Logic, RS-232 / RS-485 compatible transceivers, as well as combinational logic, GPIOs, and bus drivers.The integrated +5V Supply pin allows the device to be used in a dual-supply situation using either a +3.3V or +5V supply voltage. It has several pins that make it ideal for a variety of applications, including logic interfacing and fast switching lines. The MAX3454EEUD+ includes a variety of features, including Schmitt-trigger inputs, low resistor current sinks, power-up or power-down detection, and an integrated pull-up or pull-down resister for the output.

Working Principle

The MAX3454EEUD+ is a dual voltage level shifter that operates on both 5V and 3.3V levels. Its internal control logic enables a full robustness and performance of an external interface device.When the device is connected to a single power supply, it will use the logic level of its connected power supply voltage as a reference. When the device is connected to a dual power supply it can be used to interface with either 5V or 3.3V logic.The device operates by using the input voltage on one side of the device and the output voltage on the other side of the device to shift the voltage levels. If the input is 5V, then the output will be 3.3V, and vice versa. The device also offers a power up or power down detection and an integrated pull-up/pull-down resistor.The outputs of the MAX3454EEUD+ are capable of driving both TTL and CMOS logic circuits, making it ideal for interfacing with a wide variety of devices. The device also features Schmitt-trigger inputs for noise immunity, low resistive current sinks, and an integrated pull-up or pull-down resistor for the output.

Conclusion

The MAX3454EEUD+ is an ideal Interface - Drivers, Receivers, Transceivers application device and is ideal for a wide variety of applications. It is capable of providing a low voltage interface that is compatible with both 5V and 3.3V interfaces. It provides a robust and high-performance signal shaping, noise immunity, and a wide variety of features.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description