MAX3627CTJ+

Ratio - Input:Output:	1:8
Base Part Number:	MAX3627
Supplier Device Package:	32-TQFN-EP (5x5)
Package / Case:	32-WFQFN Exposed Pad
Mounting Type:	Surface Mount
Operating Temperature:	0°C ~ 70°C
Voltage - Supply:	3 V ~ 3.6 V
Frequency - Max:	312.5MHz
Differential - Input:Output:	No/Yes
Series:	--
Number of Circuits:	1
Output:	LVCMOS, LVDS
Input:	LVCMOS, Crystal
Main Purpose:	Ethernet
PLL:	Yes
Part Status:	Obsolete
Packaging:	Tray

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

MAX3627CTJ Application Field And Working Principle

The MAX3627CTJ is a clock/timing application specific integrated circuit (ASIC). It is used to accurately measure and control the time between events such as clocks or other precise measurements, and is available in a range of sizes, from 6 to 28 pins. It is mainly used in the aerospace, automotive and telecommunications industries, particularly where high speed, low power and reliability are key requirements.

Application Field

The MAX3627CTJ can be used in a number of specific applications, such as to accurately measure and control power flow in automatic power control systems, and to precisely generate clock signals. It can also be used in clock/timing applications where short temporal resolution is required, such as remote monitoring systems, automatic test equipment and motion control.

Functional Description

The MAX3627CTJ is a fully integrated clock/timing ASIC. It consists of two main components: a crystal oscillator and an integrated circuit. The crystal oscillator is designed to provide a precise frequency for the output signal, typically a few hundred hertz, and to provide a stable reference frequency for the integrated circuit. The integrated circuit contains a number of logic blocks, depending on the size and capabilities of the chip, which enables it to perform various functions, including counting events, timing intervals, measuring the frequency of a signal, and resetting the count.

Working Principle

The working principle of the MAX3627CTJ is based on the principle of oscillators. An oscillator is an electronic device whose output frequency is a result of a combination of capacitance, inductance and resistance values. The MAX3627CTJ uses a quartz crystal oscillator to provide the reference frequency for its integrated circuit. The crystal oscillator is connected to a capacitor, inductor and resistor, which form an LC filter circuit. The filter circuit is designed to eliminate any harmonics and to produce a sinusoidal waveform. This waveform is then fed into the integrated circuit, which counts and times events.The clock/timing ASIC also has a number of inputs and outputs, which can be used to control different aspects of the circuitry. Typically, one or more timing inputs can be used to set a specific time interval, while other inputs and outputs can be used to control the oscillator frequency or to reset the count.The MAX3627CTJ also has an internal temperature sensor, which allows it to operate in extreme temperatures. This is important in applications such as aerospace and automotive where it is vital to maintain accuracy over a wide range of temperatures.In summary, the MAX3627CTJ is a highly advanced clock/timing ASIC, designed for applications where speed, accuracy and reliability are key requirements. Its range of inputs and outputs, along with its internal temperature sensor, enable it to be used in a variety of situations, from remote monitoring systems to motion control.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description