MAX3698EVKIT+

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The MAX3698EVKIT+ evaluation and demonstration boards and kits serve as a tool to evaluate, demonstrate, and design with MAX3698 low-voltage, +3.3V, low-power, dual-output 2:1 multiplexer. This device functions as a switch matrix that is driven by four parallel data inputs, two selection inputs, and three control signals. Data transmitted through this device is in a low-voltage, dual signal format.

The MAX3698EVKIT+ provides an unique set of features with its flexible architecture and circuitry. It offers a number of configurable switch and mux control lines and the ability to select between multiplex and differential inputs and receive data in either serial or parallel format. It provides very low power consumption and a high switching speed, which is important for the efficient operation of embedded systems.

The board is built on a multilayer substrate to ensure proper signal integrity and includes an I/O breakout that includes a 3.3V voltage regulator, which supplies five hundred milliamps of current. The board is configuredk with six twenty-four milliamp multiplexers, eight one hundred nanofarad bypass capacitors, and sixty-four milliamp high-performance switching FETs to enable the MAX3698 to operate up to an operating frequency of fifty-two megahertz.

The board consists of several components including a MAX3698 integrated circuit, an I/O breakout, a resettable current-sense circuit, a voltage reference, and a microcontroller. Also included on the board are several jumpers and a status LED, which provides visual indication when the board is receiving data. The MAX3698 provides an eight bit static input register and an eight bit multiplexed output register. When an input is asserted the associated multiplexer bit is set high and all the other output bits are set low.

The device operates under a few different modes of operation. In “free-running” mode, the MAX3698 only uses two input signals, “A” and “B”, for selection of the desired output and operates with a single clock. In “stall” mode, the part stalls when the input signals “A” and “B” is overridden, and drains power from the supply only when the device is enabled. In “burst” mode, the MAX3698 allows the user to specify which input signals will be used and what clock speed will be used to switch to the desired outputs, thus allowing for faster switching times.

The MAX3698 can be used in a variety of applications due to its dual-output and low-voltage signals. It can be used in power management systems to increase the number of switched connections while decreasing the system power consumption. It can also be used to design reliable data buses along with its powerful switch matrix architecture. It can also be used as an interface for LEDs and other low-voltage logic applications.

In conclusion, the MAX3698 is a low-voltage, low-power, dual-output 2:1 multiplexer. It’s built-in I/O breakout, low power consumption, and high switching speed makes it an ideal choice for many embedded applications. With its flexible characteristics and powerful design, the MAX3698 can be used in a variety of applications, from power management to data buses, LED control to low-voltage logic applications.

The specific data is subject to PDF, and the above content is for reference