MAX547ACMH

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Data Acquisition - Digital to Analog Converters (DAC) is an important concept in the field of digital engineering. As a type of DAC, the MAX547ACMH is an integrated circuit that converts digital signals into analog signals. In this article, we will discuss its application field and working principle.

The MAX547ACMH is a 10-bit voltage output DAC with an analog voltage range of +2.5 V to +10.75 V and a 0 V to full-scale accuracy of ±2.7%. It has two input pins for digital data and a central digital-to-analog conversion unit. The MAX547ACMH is ideal for applications that require high precision and low noise performance such as industrial process control, medical instrumentation, aviation, and automotive systems.

The MAX547ACMH has a unipolar supply, with the output range centered around ground. However, the part can also be configured for bipolar operation, in which the output range is shifted to a positive voltage, allowing for the operation of bipolar and unipolar circuits. When configured for bipolar operation, the output is shifted to a positive voltage and the resistor strings are configured to center their offset around the midpoint of the output range. This allows the output to range from a negative voltage to a positive voltage.

The MAX547ACMH features a wide data rate range, up to 150 MHz in low power standby mode, and four output update rates, enabling fast and flexible performance. The device also features an output voltage bootstrapping option, which enables even higher operating speeds, improved settling, and reduced dynamic headroom. The device also features a logic power-down mode, which enables further power savings.

In terms of its working principle, the MAX547ACMH features a highly accurate voltage output, using an internalclosed loop multiplier acting as a gain component and allowing for precise amplifier output voltage level control. A combination of resistor strings, voltage reference, and a rail-to-rail, 10-bit output voltage control is used for resolution higher than 8 bits. The output current is generated through a combination of an external driver, delivering up to 40 mA, and an internal current limit, reducing current limitation to 600 μA. The output is combined with an external operational amplifier to achieve full analog performance.

In conclusion, the MAX547ACMH is a versatile 10-bit voltage output DAC, ideal for applications requiring high precision, low noise performance, and fast response time. Its combination of internal closed-loop control, wide data range, and flexible output update rates make it an ideal solution for industrial process control, medical instrumentation, aviation, and automotive systems.

The specific data is subject to PDF, and the above content is for reference