MAX8862LESE+T

Current - Output:	100mA, 250mA
Base Part Number:	MAX8862
Supplier Device Package:	16-SO
Package / Case:	16-SOIC (0.154", 3.90mm Width)
Mounting Type:	Surface Mount
Operating Temperature:	-40°C ~ 85°C
Protection Features:	Over Temperature, Reverse Polarity, Short Circuit
Control Features:	Enable, Power Good
PSRR:	--
Current - Quiescent (Iq):	330µA
Series:	--
Voltage Dropout (Max):	0.35V @ 100mA, 0.33V @ 200mA
Voltage - Output (Max):	11V
Voltage - Output (Min/Fixed):	2V (4.95V)
Voltage - Input (Max):	11.5V
Number of Regulators:	2
Output Type:	Adjustable (Fixed)
Output Configuration:	Positive
Part Status:	Discontinued at Digi-Key
Packaging:	Tape & Reel (TR)

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Introduction

MAX8862LESE+T is a dual-channel linear voltage regulator designed to provide low-noise, adjustable output voltage and low output current in a low-power system. The regulator is specifically designed for applications such as telecom, automotive, military, and industrial applications.The regulator has two channels, each channel providing a regulated output ranging from 1.2V to 5V. The MAX8862LESE+T includes two on-chip voltage references and is capable of enabling or disabling both regulated outputs in a fault or shutdown condition.

Applications

MAX8862LESE+T can be used in a variety of applications, from wearable medical devices to industrial monitoring and automotive systems. The MAX8862LESE+T can be used in applications that require low noise and low power, such as in medical applications, where low noise of a regulated output is key to reliable performance. In many medical devices, such as ECG and EEG, low noise is critical to accurate data readings. The MAX8862LESE+T is able to provide low-noise, adjustable output voltage and low output current, making it suitable for these applications. In automotive applications, the MAX8862LESE+T can be used to provide power to on-board systems such as navigation, infotainment and instrument clusters. The MAX8862LESE+T is able to provide low-noise, adjustable output voltage and low output current, making it suitable for providing power to these systems without disruption to signal sensing accuracy or system performance. MAX8862LESE+T can also be used in industrial monitoring applications such as gas turbines, large motors and instrumentation where precise and low-noise power is required.

Features

The MAX8862LESE+T provides a variety of features that make it suited to a variety of applications. The output voltage is adjustable via an external resistor divider and is set with an accuracy of ±1.5%. The output voltage can also be adjusted to the desired level via an external reference voltage and an on-chip amplifier. The MAX8862LESE+T operates at a maximum voltage of 5V and provides current up to 10mA per each output channel. The dual linear voltage regulator is capable of distributing over 100mA total output current, which is ideal for low-power systems. The MAX8862LESE+T includes two on-chip voltage references that can be used to provide voltage to the input, allowing for precise and low-noise operation. This can be very useful in medical, automotive and industrial applications, where low noise of a regulated output is key to reliable performance.The MAX8862LESE+T has a fault or shutdown detection capability, allowing the regulator to be disabled in the event of a fault or shut down. This feature is useful in automotive applications, where the regulator can be used to provide power to systems reliably and safely.

Working Principle

The MAX8862LESE+T is a dual-channel linear voltage regulator designed to provide low-noise, adjustable output voltage and low output current in a low-power system. The regulator contains two on-chip voltage references, which allow the voltage outputs to be set with an accuracy of ±1.5%.The MAX8862LESE+T operates by taking the input voltage, supplied either externally or from an on-chip voltage reference, and passing it through an amplifier to regulate the output voltage. The regulated output voltage is set with an external voltage divider and is accurate to ±1.5%. The MAX8862LESE+T is capable of providing current up to 10mA per each output channel, with a total output current of over 100mA. The regulator also has a fault or shutdown detection capability, allowing the regulator to be disabled in the event of a fault or shut down. This feature is useful in automotive applications, where the regulator can be used to provide power to systems reliably and safely.

Conclusion

The MAX8862LESE+T is a dual-channel linear voltage regulator designed to provide low-noise, adjustable output voltage and low output current in a low-power system. The regulator is suitable for use in applications such as medical, automotive and industrial, where low-noise and reliable performance are key. The MAX8862LESE+T is able to provide current up to 10mA per each output channel 5V and provides an adjustable output voltage with an accuracy of ±1.5%. The MAX8862LESE+T also includes an on-chip voltage reference and fault or shutdown detection capability, making it an ideal choice for applications requiring low-power and low noise performance.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description