MIC1832N

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Power Management Integrated Circuits or PMICs are an integral part of many systems, providing effective power management for the system. The MIC1832N Supervisors are an example of PMIC devices used for a variety of applications. This article will discuss the application fields of the MIC1832N and its working principle.

Application Fields

The MIC1832N is a fixed voltage supervisor with a reset output. It is used for a wide range of applications, including general-purpose microprocessor reset applications, battery charge controllers and system monitoring. It is designed to detect voltages greater than, equal to or less than a threshold voltage, and to provide a reset signal when the threshold is crossed. It can detect voltages between 4V and 28V, and works with standard logic signals.

This device is most commonly used to control microprocessor reset signals in memory applications, as it can provide a logic-low reset signal to reset the processor when the supply voltage drops below a certain threshold. It is also useful for automatically detecting power-up and power-down conditions, allowing for a graceful powering-down of the system. The MIC1832N can also be used for intelligent power-saving applications, such as turning off devices when the voltage drops below a certain level.

In addition to controlling reset signals, the MIC1832N is also used in battery charge controllers to detect when the battery needs charging. It can sense both high levels and low levels of voltage, and can be configured to trigger a charging command when the voltage reaches a certain point. This makes it ideal for applications where reliable charging is important. Finally, the MIC1832N can also be used for system monitoring and for providing a visual indication when the voltage reaches a certain point.

Working Principle

The MIC1832N runs on a range of voltages from 4V to 28V and is able to detect voltage levels greater than, equal to, or less than a reference voltage and generate the appropriate reset signal. When the voltage goes above the reference voltage, the output goes to logic high. The output will stay high until the voltage drops below a lower threshold. At that point, the output will go to a logic low until the voltage rises again. This ensures that the reset signal is automatically generated whenever the supply voltage drops below a certain level.

The MIC1832N also has a built-in hysteresis. This means that it will not immediately toggle when the voltage reaches the threshold but will instead wait until it crosses a certain level before toggling the output. This ensures that the output will not toggle too often, which could interfere with the system’s operation. The hysteresis level can be adjusted using an external resistor.

In addition to the reset feature, the MIC1832N also provides a real-time monitoring of the supply voltage, along with an active-high indicating interrupt pin. This pin can be used to indicate a voltage drop below the threshold for continuous monitoring or for diagnostics purposes. Finally, the MIC1832N has an integrated adjustable power-on delay of up to 10ms, allowing for proper initialization of the system.

Conclusion

The MIC1832N is a PMIC device used for a wide range of applications, from microprocessor reset signals to system monitoring and battery charge controllers. Its features include detection of voltages greater than, equal to or less than a certain threshold and can generate the appropriate reset signal when this threshold is crossed. It also has a built-in hysteresis and a power-on delay feature. It is designed to be used in a wide range of applications and is reliable and easy to use.

The specific data is subject to PDF, and the above content is for reference