MLCE48AE3

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Transient Voltage Suppressor (TVS) diodes, also known as transzymitors or transient suppressor devices, are used to protect sensitive components and circuits from voltage spikes in the range of hundreds of volts, commonly caused by static electricity, lightning strikes, or switching events. The MLCE48AE3 is a TVS, designed to protect components from transients up to 1500W. This type of diode can also be used to protect against Electrostatic Discharge (ESD) and similar harmful electrical conditions.

The TVS MLCE48AE3 is a 48V dual transient surge suppressor. It features a Fast Turn-on Capability (FTC), Thermal Shutdown (TS) and Over-Voltage Protection (OVP), which are all conditions related to protecting components from electrical over-stressing. The device also has a low clamping voltage of 6.5 volts, which means it can be used to protect components that are operating at lower voltages.

The distinctive feature of the MLCE48AE3 is its reverse standoff voltage (RVSO), or the reverse voltage that a reverse polarity of applied voltage should not exceed. The RVSO ensures that the device remains in a reverse blocking state when the applied voltage of reverse polarity is under a certain voltage. The RVSO for the MLCE48AE3 is 48V.

The MLCE48AE3 applications and working principle can be divided into two categories; protection circuit application and noise suppression application. In a protection circuit application, the MLCE48AE3 acts as a crowbar, or short-circuiting device, for the protection of active devices or for current limiting. This type of protection circuit is commonly used in telecom applications such as DC-DC converters. The Crowbar Mode protection circuit works by generating a signal that short-circuits the circuit when a pre-determined voltage is exceeded.

In a noise suppression application, the MLCE48AE3 is used to suppress noise and surge in High Frequency (HF) power supplies, as well as motor-driven equipment like fan coils. It works by shunting the high-frequency noise and voltage surge away, protecting the component or system from damage. It is also used in power supply applications that feature hot-swapping, like USB or Parallel ports, where the device can quickly discharge the excess electricity.

In summary, the MLCE48AE3 is a 48V dual transient surge suppressor. It is used to protect components from transients up to 1500W and can be used in protection circuit applications to provide current limiting or reverse over-voltage protection. The device also provides noise suppression and can be used to protect components from HF noise and surge in power supplies or motor-driven equipment. The MLCE48AE3 is a versatile and highly efficient transient suppressor device.

The specific data is subject to PDF, and the above content is for reference