MLCE58A

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

TVS Diodes, like the MLCE58A, are essential components which protect sensitive components and systems from damage due to voltage transients. A TVS Diode acts as a surge-dependent short-circuit, capable of conducting a large current within a short amount of time, balancing the electrical forces on the protected device to keep its operating voltage within acceptable limits. The MLCE58A is a silicon avalanche diode, a type of diode which offers extremely fast breakdown response.

The MLCE58A has a standoff voltage of 5.8V, and a maximum working voltage of 6.6V. It is capable of handling a maximum rated peak pulse current (Ipp) of 40A, with a peak pulse power (Ppp) of 900W. The device is doped with an anti-parallel avalanche diode, making it a stand-alone unidirectional diode. This gives it the ability to efficiently suppress voltage transients over the wide band range of 5V to 6.6V.

Due to its combination of ultra low capacitance and a low stand-off voltage, the MLCE58A is ideal for protecting automotive electronics and other sensitive components in general, including but not limited to data lines, control lines, and sensitive power supplies from transients caused by electrostatic discharge (ESD), lightning, and other electrical disturbances.

In operation, the MLCE58A connected to a protected line, in shunt resistance configuration. When a low-energy transient is present on the protected line, the diode\'s response will be relatively slow. The voltage on the protected line will remain sufficiently below the diode\'s breakdown voltage, keeping it in an off state. Additionally, the diode\'s capacitance remains low. When a high-energy transient is present on the protected line, however, the voltage on the line will exceed the diode\'s breakdown voltage, causing it to go into an on state. This places the diode in series with the transistor, clamping the voltage on the protected line to its maximum working voltage of 6.6V.

As the current dissipating through the diode increases, the diode\'s capacitance will increase, causing the voltage on the protected line to approach the diode\'s breakdown voltage. As current dissipates, the diode\'s capacitance will decrease and the voltage on the protected line will drop back to normal. The MLCE58A is able to handle a maximum peak pulse current of 40A with a peak pulse power of 900W, so it is more than capable of withstanding any transients that may occur to a component or system.

The MLCE58A offers excellent performance in mitigating voltage transients in a variety of applications, making it an ideal choice for protecting sensitive automotive electronics and components. By placing a TVS Diode in shunt resistor configuration, one can ensure the protection of vulnerable components and systems, and prolong the life of the connected device or system.

The specific data is subject to PDF, and the above content is for reference