MMBTA13LT1

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The MMBTA13LT1 is a single bipolar junction transistor (BJT). It is a type of current-controlled semiconductor switch, commonly used in integrated analog circuits for a wide range of applications. This transistor has an NPN type configuration with built-in protection from input and collector-base shorting and has an impedance current level of 8mA. It features excellent current ratings of up to 2A and offers a relatively low voltage drop. The MMBTA13LT1 is designed for use in audio amplifiers, automotive electronics, and other low-to-medium power applications.

In general, the MMBTA13LT1 operates in three modes depending on the levels of input current and applied voltage. The first mode is known as cut-off mode, where the transistor is completely switched off. This mode is achieved when there is no input current and the collector-base voltage is above its threshold level. In this mode, no electric current flows through the transistor and no electric power is dissipated.

The second mode of operation is called the saturation mode, where the transistor is completely turned on and maximum current flows through it. This mode is achieved when the input current is at its maximum while the collector-base voltage is equal to or below its specified gate threshold voltage. During this state, the collector current is at its maximum while being saturated and heat is being dissipated due to the current flow.

The last mode of operation is called the linear mode, where the transistor is partially turned on. This mode occurs when the input current is below its minimum required threshold and the collector-base voltage is within its specified range. During this state, the transistor acts as an amplifier and the output voltage is dependent on the input current. The MMBTA13LT1 provides excellent stability and low noise performance.

The MMBTA13LT1 has a wide frequency range of up to 3MHz, making it suitable for a variety of applications. It can be used in audio amplifiers, automotive electronics, power supplies, and other low-to-medium power applications. The transistor is also provided with built-in protection from input and collector-base shorting. It has a wide voltage range of up to 60V and a maximum collector current of 2A.

In conclusion, the MMBTA13LT1 is a single bipolar junction transistor (BJT) suitable for a variety of low-to-medium power applications. It is designed to provide excellent current ratings and voltage drops as well as excellent stability and low noise performance. With its wide frequency range and built-in protection, the MMBTA13LT1 makes an excellent choice for many applications.

The specific data is subject to PDF, and the above content is for reference