MP4410GQ-Z Integrated Circuits (ICs)

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Introduction
The MP4410GQ-Z is a single-channel non-synchronous buck switching regulator designed for applications in low-power embedded systems. It has an integrated low noise VCO, adjustable outputs and accepts wide voltage input ranges. It is well suited for battery-powered systems, where low power and minimal space requirements are paramount. The MP4410GQ-Z is a DC to DC buck regulator with an adjustable output voltage range of 1.1 V to 6.0 V and a maximum output current of 30 A.

Features
The MP4410GQ-Z has many features which make it ideally suited for embedded systems:

• High Efficiency – Provides excellent efficiency, up to 95% under light load conditions.
• Adaptive On-Time Control – Allows the regulator to dynamically adjust its output voltage to compensate for the loading conditions while maintaining a constant output voltage.
• Wide Input Range – Can accept input supply voltage ranging from 4.5 V to 48 V, allowing it to be used in a variety of applications.
• Integrated Low-Noise VCO – Enables the device to operate in noisy environments with minimal interference.
• Adjustable Output Voltage – Allows the output voltage to be precisely lowed or raised to meet the requirements of the application.
• Simple Interface – Makes it easy to set up the device quickly and reduce the time to market.

Application Field
The MP4410GQ-Z is a versatile buck switching regulator which is well suited for a variety of embedded applications. It can be used in consumer electronics, telecommunications, network routers/servers, power supplies, and automotive electronics. In consumer electronics it can be used to power portable audio devices, small consumer appliances, and lighting devices. In telecommunications, it is ideal for powering wireless LANs, Wi-Fi access points, and base stations. In automotive electronics, it can be used to power infotainment systems, navigation systems, and vehicle monitoring systems. In power supplies, the regulator can be used to drive motors, refrigerators, and industrial devices.

Working Principle
The MP4410GQ-Z is a non-synchronous buck regulator, meaning it has two main components: an inductor and a MOSFET Switch. When the switch is closed, the voltage of the input is dropped across the inductor at a constant rate, producing an output voltage at the drain. During this switch-on period, the inductor stores energy and eventually reaches a point of saturation. The switch is then opened and the stored energy is released from the inductor, producing the output voltage at the drain. The output voltage can be finely adjusted via external resistors, which control the duty cycle of the switch.

The MP4410GQ-Z also has an integrated low noise VCO which helps reduce the noise created by the switching regulator. The VCO acts to suppress the effects of noise and maintain a constant output voltage, even in noisy operating environments. Additionally, the device has an adaptive on-time control which allows the device to automatically adapt its output voltage in response to the loading conditions, ensuring a constant output voltage. The switching frequency of the MP4410GQ-Z can be adjusted through an external resistor, allowing designers to fine tune the device to match their specific application requirements. Additionally, the device also has a power-good output pin for monitoring the voltage output of the regulator. The power-good pin can be set to power off or latch off the device when the output voltage drops below a designated value.

Conclusion
The MP4410GQ-Z is a single-channel non-synchronous buck switching regulator ideally suited for embedded systems. It has a wide input range, low noise VCO, adjustable output voltage, and adjustable switching frequency. It is well suited for applications in consumer electronics, telecommunications, power supplies, and automotive electronics. Additionally, the device has an integrated power-good output pin which can be used to monitor the output voltage and take action accordingly.

The specific data is subject to PDF, and the above content is for reference