MT49H16M18BM-25:B TR

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

When discussing memory, the MT49H16M18BM-25:B TR is a commonly used, low-cost integrated memory chip which is available in a variety of applications. It is a 256Mb DRAM with an async page mode interface and is used for a range of applications, including data storage, system monitoring, communications systems, and audio/video applications.

The MT49H16M18BM-25:B TR has a total capacity of 256Mb, which can be configured in a variety of combinations. Each memory cell has an 8-bit-wide data bus, and a 128MBit/s, DDR-II, 333MHz data rate. This common memory operating frequency is supported by a 192Kbits refresh buffer, which helps to keep the refresh rate low and provide fast access times.

The power consumption of this memory is also very low. It draws only 2.5V, with a standby power consumption of only 10 mW, and a typical idle power consumption at 2mA. This makes the device well suited for mobile, wearable, and internet-of-things applications where power consumption is of great importance.

The MT49H16M18BM-25:B TR can operate in several modes. The most common mode is page mode, in which responses are sent as soon as the data is outputted and no delay is necessary. This mode provides good access times, since data can be output within the same cycle of the read command from the memory. The old alternate page mode is also available, in which the memory can decode more complex sequences of commands, where the response is delayed. Other operating modes are also available, such as burst mode and multiplexed mode, but these are less commonly used.

The MT49H16M18BM-25:B TR can be used in a wide variety of applications. For example, it is used in data storage applications such as solid-state drives and hard disk drives. It is also used in system monitoring applications, such as temperature, humidity, and pressure sensors, where fast data access speeds are critical. It is also used in communications applications, where reliable, fast data throughput is important. Additionally, it can be used in audio/video applications, such as video cameras and digital video recorders, where processing speed and memory storage capacity are also important.

In conclusion, the MT49H16M18BM-25:B TR is a common, low-cost integrated memory chip. It has a total capacity of 256Mb and supports a variety of operating modes. Its low power consumption and good access times make it well suited for a variety of applications, including data storage, system monitoring, communications, and audio/video. Its wide range of applications and cost-effectiveness make it an attractive choice for many applications.

The specific data is subject to PDF, and the above content is for reference