NLSX3012MUTAG

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Logic translators and level shifters are essential for electronic devices to exchange data between components operating at different logical levels and voltages. The NLSX3012MUTAG is a dual level-shifter and translator that can bridge low voltage (1.2V and below) or high voltage (3.3V or 5V) input signals with output signals of a different level and voltage.

The NLSX3012MUTAG is a bi-directional device, meaning data can flow between the two sides. It converts either one-transistor output signals (1.2V and below) to two-transistor output signals (3.3V or 5V) or two-transistor output signals (3.3V or 5V) to one-transistor output signals (1.2V and below). It also enables compatibility between high voltage and low voltage components.

The NLSX3012MUTAG can operate in both single-ended and differential modes. In the single-ended configuration, both the input and output are driven by the same voltage source. In the differential configuration, the input and output are driven by separate voltage sources, with the input voltage being either positive or negative with respect to the output voltage. The NLSX3012MUTAG also has an internal power-on reset circuitry that ensures proper power-up sequencing and operation.

The NLSX3012MUTAG\'s main application is in bridging the gap between various devices and components with different levels and voltages. It is particularly useful in systems with multiple chip or component levels, or those which include both high voltage and low voltage components. For example, it can be used to translate between 1.2V and 5V input and output signals in consumer electronics (such as a DVD player, TV or game console), or servers and data centers.

The NLSX3012MUTAG works by taking the input signal and converting it to a valid logic level for the output signal. It does this by reading the input voltage level and outputting either a ‘freeze’ or ‘driven’ signal, depending on the voltage. The ‘freeze’ signal is given when the input voltage is lower than a certain threshold, while the ‘driven’ signal is given when the input voltage is higher than a certain threshold. The device then interprets these signals as either a low or a high logic state and output the corresponding level.

The NLSX3012MUTAG is a versatile device that helps bridge the gap between different voltage levels, allowing devices and components to communicate with each other. It can be used in electrical systems of different types and sizes, from consumer electronics to servers and data centers.

The specific data is subject to PDF, and the above content is for reference