| Allicdata Part #: | 497-10292-5-ND |
| Manufacturer Part#: |
PD84006-E |
| Price: | $ 10.99 |
| Product Category: | Discrete Semiconductor Products |
| Manufacturer: | STMicroelectronics |
| Short Description: | FET RF 25V 870MHZ PWRSO-10RF |
| More Detail: | RF Mosfet LDMOS 7.5V 150mA 870MHz 15dB 6W 10-Power... |
| DataSheet: |  PD84006-E Datasheet/PDF |
| Quantity: | 148 |
| 1 +: | $ 9.98550 |
| 10 +: | $ 9.17973 |
| 100 +: | $ 7.75257 |
| Series: | -- |
| Packaging: | Tube |
| Part Status: | Active |
| Transistor Type: | LDMOS |
| Frequency: | 870MHz |
| Gain: | 15dB |
| Voltage - Test: | 7.5V |
| Current Rating: | 5A |
| Noise Figure: | -- |
| Current - Test: | 150mA |
| Power - Output: | 6W |
| Voltage - Rated: | 25V |
| Package / Case: | PowerSO-10 Exposed Bottom Pad |
| Supplier Device Package: | 10-PowerSO |
| Base Part Number: | PD84006 |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
The PD84006-E is an RF switch that is designed to provide high isolation between two signal paths. It is a monolithic chip that contains an integrated MOSFET transistor, which is designed to provide a high level of performance while also being cost-effective. The PD84006-E is ideal for use in RF applications such as cellular base station antennas, satellite communications, and other high-frequency circuits.
The PD84006-E is a depletion-mode MOSFET that operates at frequencies up to 10GHz. The device is manufactured using a 0.25 μm CMOS process. It has a low ON-state resistance of 2.8Ω and a high OFF-state resistance of 1MΩ. The device also has a high input impedance of 150KΩ, which ensures that the switch does not affect the signal to be switched between two different paths. The device also has an input voltage range of 0V to 3.3V, and a low threshold voltage of 0.4V.
The MOSFET acts as the switch in the PD84006-E. It is controlled by the Gate pin, which is connected to the logic signal. When the logic signal is low (0V), the MOSFET is in its OFF state and no current can flow through the device. When the logic signal is high (3.3V), the MOSFET is in its ON state and current can flow through the PD84006-E. In this way, it is possible to switch the signal between two different paths.
The PD84006-E is a RF switch that is designed to provide good isolation between two signal path. The device is ideal for applications such as cellular base station antennas, satellite communications, and other high-frequency circuits. The device can be controlled by a logic signal and can switch the signal between two paths. The device has a low ON-state resistance of 2.8Ω and a high OFF-state resistance of 1MΩ, which ensures that the device does not affect the signal. The PD84006-E is a cost-effective and reliable device for RF applications.
The specific data is subject to PDF, and the above content is for reference
| Part Number | Manufacturer | Price | Quantity | Description |
|---|
| PD84010S-E | STMicroelect... | 0.0 $ | 1000 | TRANS RF N-CH FET POWERSO... |
| PD84010TR-E | STMicroelect... | -- | 1000 | FET RF 40V 870MHZ 10PWRSO... |
| PD84008L-E | STMicroelect... | -- | 1000 | FET RF 25V 870MHZRF Mosfe... |
| PD84008S-E | STMicroelect... | -- | 1000 | TRANS RF N-CH FET POWERSO... |
| PD84002 | STMicroelect... | 1.48 $ | 1000 | FET RF 25V 870MHZRF Mosfe... |
| PD84006L-E | STMicroelect... | -- | 6000 | FET RF 25V 870MHZRF Mosfe... |
| PD84006-E | STMicroelect... | 10.99 $ | 148 | FET RF 25V 870MHZ PWRSO-1... |
| PD84010-E | STMicroelect... | 8.44 $ | 1000 | FET RF 40V 870MHZRF Mosfe... |
| PD84001 | STMicroelect... | -- | 1000 | FET RF 18V 870MHZRF Mosfe... |
| PD84008-E | STMicroelect... | -- | 1000 | FET RF 25V 870MHZRF Mosfe... |
FET RF 68V 2.16GHZ NI-400RF Mosfet LDMOS...
FET RF 68V 1.99GHZ TO270-4RF Mosfet LDMO...
FET RF 40V 175MHZ TO272-6 WRAPRF Mosfet ...
FET RF 65V 2.17GHZ NI780SRF Mosfet LDMOS...
FET RF 80V 1.6GHZ M243RF Mosfet LDMOS 28...
FET RF 80V 1.6GHZ M243RF Mosfet LDMOS 28...