Allicdata Part #: | PE43404MLI-ND |
Manufacturer Part#: |
PE43404MLI |
Price: | $ 0.00 |
Product Category: | RF/IF and RFID |
Manufacturer: | pSemi |
Short Description: | IC RF DSA 4-BIT 75 OHM 20-QFN |
More Detail: | RF Attenuator 15dB ±0.25dB 0Hz ~ 2GHz 75 Ohms 20-... |
DataSheet: | PE43404MLI Datasheet/PDF |
Quantity: | 1000 |
1 +: | 0.00000 |
Series: | UltraCMOS® |
Packaging: | Strip |
Part Status: | Obsolete |
Attenuation Value: | 15dB |
Frequency Range: | 0Hz ~ 2GHz |
Power (Watts): | -- |
Impedance: | 75 Ohms |
Package / Case: | 20-WFQFN Exposed Pad |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
Attenuators
An attenuator is an electronic device that reduces the magnitude of an electrical signal without introducing distortion. It is most commonly used to reduce the peak power of high-power radio or microwave signals so as to improve signal-to-noise ratio. A typical attenuator looks like a resistor and is made up of attenuation elements, which may take the form of diode, varactor, and semiconductor switches, depending on the application.
PE43404MLI is a high performance, cost-effective, low-noise attenuator family consisting of microwave and millimeter-wavemonolithic attenuators. It is designed to provide excellent insertion loss and temperature stability, making it suitable for a variety of applications in both consumer and industrial segments. The attenuator has a wide range of operating frequency from 0.01.5 GHz through 6.4 GHz.
Application field
- Radar
- Wireless communication
- Test and measurement instruments
- Instrumentation
- Microwave/millimeter-wave components
- Portable/fixed radios
- Satellite communication
- Broadcast and CATV systems
Working principle
The working principle of PE43404MLI is based on a resistive type attenuator. It is made of four high performance resistive attenuation elements which are connected in series. The four elements are spaced at exact intervals to achieve both high linearity and sharp cut-off at desired frequencies. The attenuation factor of the unit is determined by the relative resistance values of each discrete element. The resistance values are set in accordance with an attenuation slope requirement, which defines the frequency points where the gain should drop and how much gain should be drop at each frequency point.
The attenuation range of PE43404MLI is from 0dB to 20dB, and the maximum input power is typically +21dBm, and the maximum output power is +1dBm. In addition, the unit has high linearity, excellent temperature stability and good return loss. Furthermore, the small size of this attenuator makes it well suited for integration in a variety of components.
PE43404MLI is an ideal solution for applications that require accuracy, repeatability, and small size. It provides a robust and reliable performance with superior accuracy and temperature stability. In summary, the PE43404MLI is a robust, low-cost attenuator family that offers excellent performance for a wide range of radio frequency applications.
The specific data is subject to PDF, and the above content is for reference
Part Number | Manufacturer | Price | Quantity | Description |
---|
PE4312MLBA-Z | pSemi | -- | 1000 | IC DGTL ATTEN 31.5DB 6BIT... |
PE43204MLIBA | pSemi | -- | 1000 | IC RF DSA 2BIT 50 OHM 12-... |
PE43404MLI | pSemi | 0.0 $ | 1000 | IC RF DSA 4-BIT 75 OHM 20... |
PE43502MLI | pSemi | 0.0 $ | 1000 | IC RF DSA 5-BIT 50 OHM 24... |
PE43503MLI | pSemi | 0.0 $ | 1000 | IC RF DSA 5BIT 50 OHM 24Q... |
PE43601MLI | pSemi | 0.0 $ | 1000 | IC RF DSA 6BIT 50 OHM 32Q... |
PE43602MLAA-CAZ | pSemi | 0.0 $ | 1000 | IC RF DSA 6BIT 50 OHM 24-... |
PE43602MLI | pSemi | 0.0 $ | 1000 | IC RF DSA 6BIT 50 OHM 24-... |
PE43701MLI | pSemi | 0.0 $ | 1000 | IC RF DSA 7BIT 50 OHM 32Q... |
PE43702MLI | pSemi | 0.0 $ | 1000 | IC RF DSA 7BIT 50 OHM 24-... |
PE43703MLI | pSemi | -- | 1000 | IC RF DSA 7BIT 50 OHM 32-... |
PE43404MLI-Z | pSemi | 0.0 $ | 1000 | IC RF DSA 4-BIT 75 OHM 20... |
PE43502MLI-Z | pSemi | -- | 1000 | IC RF DSA 5-BIT 50 OHM 24... |
PE43602MLI-Z | pSemi | 0.0 $ | 1000 | IC RF DSA 6BIT 50 OHM 24-... |
PE43702MLI-Z | pSemi | -- | 1000 | IC RF DSA 7BIT 50 OHM 24-... |
PE43703MLI-Z | pSemi | -- | 4068 | IC RF DSA 7BIT 50 OHM 32-... |
PE43501MLI-Z | pSemi | 0.0 $ | 1000 | IC RF DSA 5BIT 50 OHM 32Q... |
PE43503MLI-Z | pSemi | 0.0 $ | 1000 | IC RF DSA 5BIT 50 OHM 24Q... |
PE43601MLI-Z | pSemi | 0.0 $ | 1000 | IC RF DSA 6BIT 50 OHM 32Q... |
PE43701MLI-Z | pSemi | 0.0 $ | 1000 | IC RF DSA 7BIT 50 OHM 32Q... |
PE43711A-Z | pSemi | 2.41 $ | 45000 | IC RF DSA 7BIT 50 OHM 24Q... |
PE43712B-Z | pSemi | 2.58 $ | 3000 | IC RF DSA 7BIT 50 OHM 32Q... |
PE43705A-Z | pSemi | -- | 6000 | IC RF DSA 7BIT 50 OHM 32-... |
PE43704MLCA-Z | pSemi | -- | 1000 | IC RF DSA 7BIT 50 OHM 32-... |
PE43713B-Z | pSemi | 8.13 $ | 1000 | IC RF DSA 7BIT 50 OHM 32Q... |
PE4314A-Z | pSemi | -- | 1000 | IC DGTL ATTEN 31.5DB 6BIT... |
PE43205B-Z | pSemi | -- | 1000 | IC RF DSA 2BIT 50 OHM 12-... |
PE4314B-Z | pSemi | -- | 1000 | IC DGTL ATTEN 31.5DB 6BIT... |
PE43204MLIBA-Z | pSemi | -- | 1000 | IC RF DSA 2BIT 50 OHM 12-... |
PE4312C-Z | pSemi | -- | 10 | IC DGTL ATTEN 31.5DB 6BIT... |
RF ATTENUATOR 1DB-31DB 24VFQFNRF Attenua...
RF ATTENUATOR 1DB-60DB 50OHM TNCRF Atten...
RF ATTENUATOR 1DB SMA MODULERF Attenuato...
RF ATTENUATOR 2DB 50OHM 1206RF Attenuato...
RF ATTENUATOR 6DB 50OHM SMARF Attenuator...
RF ATTENUATOR 7DB SMA MODULERF Attenuato...