PE43601MLI-Z

Series:	UltraCMOS®, HaRP™
Packaging:	Tape & Reel (TR)
Part Status:	Obsolete
Attenuation Value:	0dB ~ 15.75dB
Frequency Range:	9kHz ~ 6GHz
Power (Watts):	--
Impedance:	50 Ohms
Package / Case:	32-VFQFN Exposed Pad

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

AttenuatorsThe PE43601MLI-Z is an attenuator made by Peregrine Semiconductor. It offers a wide range of applications with its wide frequency range of 5 MHz to 6 GHz, and is applicable to signal and power transmission over a variety of wireless systems and networks. In addition, its low power consumption and high isolation makes it suitable for many applications.The PE43601MLI-Z provides a wide range of forward and reverse attenuation from 0 to 14 db with a minimum insertion loss of 0.6 db. It also has low insertion loss variation, low VSWR, and low harmonics over the whole frequency range. This makes the PE43601MLI-Z an ideal choice for applications such as device and network calibration and precision attenuator networks.The PE43601MLI-Z is supplied in a 2mm to 4.6 mm packages and has an integrated bias voltage regulator that allows it to operate from as low as 4V and as high as 12V. This allows the device to support various levels of bias control for different applications.The working principle of the PE43601MLI-Z is based on the concept of using direct conversion. This technique uses a technique called series-to-parallel conversion, whereby the input signal is divided by two transistors and the output is combined to form an attenuated signal. This greatly reduces the amount of noise and distortion introduced into the signal path as compared to other conventional attenuators.The PE43601MLI-Z also features power MOSFETs at the input, which increases the signal-to-noise ratio and linearity of the signal. Moreover, the device also includes a built-in bias control circuit which provides the user with a range of bias control options.Since the PE43601MLI-Z is a solid-state device that does not require any form of calibration, it is much easier to deploy and use compared to conventional ones. It is also an ideal choice for applications that require a high degree of accuracy and reliability. Moreover, the PE43601MLI-Z is also suitable for applications where power consumption needs to be minimized due to its low power consumption.In conclusion, the PE43601MLI-Z is a great choice for attenuator systems that require wide frequency response, low insertion loss, and low power consumption. With its built-in bias control circuit and direct conversion circuitry, the PE43601MLI-Z provides a robust solution for many applications.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description