PE43711A-Z RF/IF and RFID

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Attenuators are devices used to reduce the power of a signal without introducing noise or distortion. The PE43711A-Z is a series of digital optical attenuators that can be used in a range of optical applications. This article will look at its application field and working principle.

Application Field

The PE43711A-Z is a digitally controlled optical attenuator, designed to reduce the power of an optical signal by a programmable step size. It is used in a range of applications, such as optical networks, fiber-optic test and measurement systems, and fiber-optic communication systems. It can also be used for signal conditioning, signal shaping or equalization, and gain control.

The PE43711A-Z is able to work over a wide range of temperatures, and is suitable for use in outdoor and indoor environments. It can operate from a single 5 V power supply, and has a fixed attenuation level of -20 dB (maximum 30dB in steps of 0.25 dB). The device has a high-speed toggle frequency of 13 KHz, and a fast settling time of 15 µs. It also has an adjustable standby mode so that the unit can be switched on and off with minimal power consumption.

Working Principle

The PE43711A-Z is based on an electro-optic modulator, which uses an electric field to modulate the optical signal. It is a four-port modulator, with two inputs ("IN" and "OUT") and two outputs ("STAT" and "ACT"). When an electrical signal is applied to the "IN" port, it is modulated in the "ACT" port and can then be measured at the "STAT" port. The PE43711A-Z can be used to attenuate an optical signal up to 30dB by modulating the "IN" and "OUT" ports of the modulator. The "ACT" port is used to set the attenuation level, while the "STAT" port is used to read the current attenuation level.

The PE43711A-Z is also able to control the toggle frequency of the device. The toggle frequency is the rate at which the modulator is switched between the IN and OUT ports, which determines the level of attenuation. By adjusting the toggle frequency, the attenuation level can be adjusted in a smooth and controllable manner.

The PE43711A-Z is a low-cost, efficient solution for attenuating optical signals. It is easy to use and requires minimal maintenance. It can be used in a range of optical applications, such as optical networks, fiber-optic test and measurement systems, and fiber-optic communication systems. Its adjustable toggle frequency makes it ideal for signal conditioning, signal shaping or equalization, and gain control.

The specific data is subject to PDF, and the above content is for reference