Allicdata Part #: | PE43502MLI-ND |
Manufacturer Part#: |
PE43502MLI |
Price: | $ 0.00 |
Product Category: | RF/IF and RFID |
Manufacturer: | pSemi |
Short Description: | IC RF DSA 5-BIT 50 OHM 24-QFN |
More Detail: | RF Attenuator 15.5dB ±0.3dB 9kHz ~ 6GHz 50 Ohms 2... |
DataSheet: | PE43502MLI Datasheet/PDF |
Quantity: | 1000 |
1 +: | 0.00000 |
Series: | UltraCMOS® |
Packaging: | Strip |
Part Status: | Obsolete |
Attenuation Value: | 15.5dB |
Frequency Range: | 9kHz ~ 6GHz |
Power (Watts): | -- |
Impedance: | 50 Ohms |
Package / Case: | 24-VFQFN Exposed Pad |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
Attenuators are a type of device that regulates electrical signals, reducing their amplitude, or power, without any significant distortions. The PE43502MLI is an example of an attenuator, which is specifically designed for use as a power amplifier in communications applications. This article will discuss the application field and working principle of the PE43502MLI.
The PE43502MLI is a high performance microwave amplifier designed for a wide range of applications. It is optimized for use in wireless communication systems such as cellular base stations, wireless LANs, and satellite navigation systems. It is also suitable for RF test and measurement applications. The amplifier features high linearity and low noise figure, making it an ideal choice for these types of applications.
The main purpose of the PE43502MLI is to attenuate the RF signal so that it reaches the desired level. It achieves this by using two parallel paths, one for the input signal and one for the output signal. The input signal is fed into both paths, and is then amplified. The output signal is then attenuated so that it is at the desired level. The amplifier then reduces the amplitude of the noise in the signal, ensuring that it is within the required specifications.
The PE43502MLI is designed for precise control of the output signal. It uses two digital-to-analog converters (DACs) to provide the desired level of attenuation. The DACs are controlled by a computer, which can be programmed to adjust the level of attenuation. This allows for fine tuning of the signal, ensuring that it matches the desired standards.
The working principle of the PE43502MLI is based on the concept of noise suppression. The amplifier works by reducing the amount of noise in the signal, so that it is at acceptable levels. This is achieved by using an external noise filter, which is set up to reduce unwanted signals. The amplifier is then able to reduce the noise in the signal without affecting the desired signal. The reduced noise level then allows for the desired signal to reach its intended destination.
The PE43502MLI is designed to work with a variety of communications systems. It is suitable for use in both digital and analog systems, and can be used in a variety of applications. It is also scalable, which allows for easy adjustment of the amplifier, making it suitable for a range of different power amplification requirements. The PE43502MLI is an ideal choice for a wide range of applications, and has the capability to provide precise control of output signals.
The specific data is subject to PDF, and the above content is for reference
Part Number | Manufacturer | Price | Quantity | Description |
---|
PE4312MLBA-Z | pSemi | -- | 1000 | IC DGTL ATTEN 31.5DB 6BIT... |
PE43204MLIBA | pSemi | -- | 1000 | IC RF DSA 2BIT 50 OHM 12-... |
PE43404MLI | pSemi | 0.0 $ | 1000 | IC RF DSA 4-BIT 75 OHM 20... |
PE43502MLI | pSemi | 0.0 $ | 1000 | IC RF DSA 5-BIT 50 OHM 24... |
PE43503MLI | pSemi | 0.0 $ | 1000 | IC RF DSA 5BIT 50 OHM 24Q... |
PE43601MLI | pSemi | 0.0 $ | 1000 | IC RF DSA 6BIT 50 OHM 32Q... |
PE43602MLAA-CAZ | pSemi | 0.0 $ | 1000 | IC RF DSA 6BIT 50 OHM 24-... |
PE43602MLI | pSemi | 0.0 $ | 1000 | IC RF DSA 6BIT 50 OHM 24-... |
PE43701MLI | pSemi | 0.0 $ | 1000 | IC RF DSA 7BIT 50 OHM 32Q... |
PE43702MLI | pSemi | 0.0 $ | 1000 | IC RF DSA 7BIT 50 OHM 24-... |
PE43703MLI | pSemi | -- | 1000 | IC RF DSA 7BIT 50 OHM 32-... |
PE43404MLI-Z | pSemi | 0.0 $ | 1000 | IC RF DSA 4-BIT 75 OHM 20... |
PE43502MLI-Z | pSemi | -- | 1000 | IC RF DSA 5-BIT 50 OHM 24... |
PE43602MLI-Z | pSemi | 0.0 $ | 1000 | IC RF DSA 6BIT 50 OHM 24-... |
PE43702MLI-Z | pSemi | -- | 1000 | IC RF DSA 7BIT 50 OHM 24-... |
PE43703MLI-Z | pSemi | -- | 4068 | IC RF DSA 7BIT 50 OHM 32-... |
PE43501MLI-Z | pSemi | 0.0 $ | 1000 | IC RF DSA 5BIT 50 OHM 32Q... |
PE43503MLI-Z | pSemi | 0.0 $ | 1000 | IC RF DSA 5BIT 50 OHM 24Q... |
PE43601MLI-Z | pSemi | 0.0 $ | 1000 | IC RF DSA 6BIT 50 OHM 32Q... |
PE43701MLI-Z | pSemi | 0.0 $ | 1000 | IC RF DSA 7BIT 50 OHM 32Q... |
PE43711A-Z | pSemi | 2.41 $ | 45000 | IC RF DSA 7BIT 50 OHM 24Q... |
PE43712B-Z | pSemi | 2.58 $ | 3000 | IC RF DSA 7BIT 50 OHM 32Q... |
PE43705A-Z | pSemi | -- | 6000 | IC RF DSA 7BIT 50 OHM 32-... |
PE43704MLCA-Z | pSemi | -- | 1000 | IC RF DSA 7BIT 50 OHM 32-... |
PE43713B-Z | pSemi | 8.13 $ | 1000 | IC RF DSA 7BIT 50 OHM 32Q... |
PE4314A-Z | pSemi | -- | 1000 | IC DGTL ATTEN 31.5DB 6BIT... |
PE43205B-Z | pSemi | -- | 1000 | IC RF DSA 2BIT 50 OHM 12-... |
PE4314B-Z | pSemi | -- | 1000 | IC DGTL ATTEN 31.5DB 6BIT... |
PE43204MLIBA-Z | pSemi | -- | 1000 | IC RF DSA 2BIT 50 OHM 12-... |
PE4312C-Z | pSemi | -- | 10 | IC DGTL ATTEN 31.5DB 6BIT... |
RF ATTENUATOR 1DB-31DB 24VFQFNRF Attenua...
RF ATTENUATOR 1DB-60DB 50OHM TNCRF Atten...
RF ATTENUATOR 1DB SMA MODULERF Attenuato...
RF ATTENUATOR 2DB 50OHM 1206RF Attenuato...
RF ATTENUATOR 6DB 50OHM SMARF Attenuator...
RF ATTENUATOR 7DB SMA MODULERF Attenuato...