Q4010N5TP

Series:	--
Packaging:	Tube
Part Status:	Active
Triac Type:	Standard
Voltage - Off State:	400V
Current - On State (It (RMS)) (Max):	10A
Voltage - Gate Trigger (Vgt) (Max):	1.3V
Current - Non Rep. Surge 50, 60Hz (Itsm):	100A, 120A
Current - Gate Trigger (Igt) (Max):	50mA
Current - Hold (Ih) (Max):	50mA
Configuration:	Single
Operating Temperature:	-40°C ~ 125°C (TJ)
Mounting Type:	Surface Mount
Package / Case:	TO-263-3, D²Pak (2 Leads + Tab), TO-263AB
Supplier Device Package:	TO-263 (D2Pak)

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Thyristors - TRIACsA TRIAC is an abbreviation of "Triode for Alternating Current" and it is a three terminal device. TRIACs are semiconductor devices that, like all thyristors, use the principle of phase control, where a positive MT2 (Main Terminal 2) current controls the phase of a negative MT1 (Main Terminal 1) current. As a result, TRIACs are suitable for use as switches in a wide range of applications.The Q4010N5TP is a silicon-controlled thyristor designed for use as a switch application in electronic circuits. It is manufactured in various packages depending on its application. The Q4010N5TP is designed to provide good electrical insulation, low noise, opera-tional reliability and low-cost production.The Q4010N5TP is a four-layer thyristor with a rated on-state current of 40 mA, a rated breakdown voltage of 400 volts, a forward blocking voltage of 500 volts, and a trigger current of 70 mA. It also has a maximum junction temperature of +150°C and a forward gate voltage of 2.5 volts. Its typical on-state resistance is 2.3 ohms.The Q4010N5TP is a four-layer thyristor with three main terminals (MT1, MT2, and G) and one gate terminal. MT1 and MT2 are the main terminals through which current flows between the anode and cathode sides of the device. G is the gate terminal, which is used to control the thyristor\'s on/off state. The gate is triggered by applying a positive voltage between the gate and main terminal (MT1 or MT2) of sufficient magnitude (greater than the minimum firing voltage). The current at MT1 or MT2 must be negative at the time of gate triggering. When the trigger voltage is reached, the Q4010N5TP switches on and allows current to flow between its two main terminals. The current can be switched off by removing the trigger voltage.The Q4010N5TP is suitable for use in a wide range of applications including relay and solenoid driving, heater control, motor speed control, light dimming, power-factor correction, and of course, switch applications. It can also be used in many lighting applications as a replacement for mechanical switches.In conclusion, the Q4010N5TP is a versatile four-layer thyristor device that can be used in a wide range of applications. It has a maximum junction temperature of +150°C and a forward gate voltage of 2.5 volts. Its current rating of 40 mA and trigger current of 70 mA makes it suitable for switch applications and for controlling appliances such as lighting, motors and heating.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description