Q6012NH1LEDTP

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Thyristors - TRIACs, a form of semiconductor, are commonly used in AC applications for production switching or electrical power regulation. The Q6012NH1LEDTP is a type of TRIAC with a maximum Gate Trigger Voltage of 12V and a maximum current rating of 1A. It has been designed to operate in an AC circuit of up to 277V.

TRIACs have three terminals (known as its anode, gate and cathode) and are able to conduct electricity in both directions. When the Gate terminal is triggered, the TRIAC switches on allowing a conduction of current until the mains voltage crosses back to zero. This makes them useful for isolating short periods of AC current, allowing flows of lower voltage, or ramping up a current to the desired level.

TRIACs are frequently found in applications that benefit from their positive temperature coefficient (PTC) semiconductor behaviour, meaning that as the temperature of the TRIAC increases causing the threshold voltage of the gate to rise, the current flowing through it will then decrease. This property makes TRIACs excellent for controlling the speed of complex motors.

The Q6012NH1LEDTP is an ideal choice for applications that take advantage of this behaviour, such as motors control, lighting dimming systems, temperature control, and many more AC control applications. This specific TRIAC also benefits from high surge current which allows it to easily cope with the inrush currents associated with various AC appliances such as fans or compressors. This high current rating also allows for the TRIAC to be used with four-wire systems that require the sum of the two line currents to be monitored.

In terms of its operation the gate terminal of the Q6012NH1LEDTP needs to be significantly lower than the anode voltage in order to ensure that the TRIAC can switch on when triggered. This voltage level is known as the Trigger Gate Voltage or Gate Trigger Voltage (IGT) and for this particular TRIAC is 12V at 25°C. After the voltage falls below the IGT, the TRIAC will turn off quickly.

At the same time the holding current (anode current when the gate voltage is 0 V) must not exceed a specified level in order to prevent the TRIAC from cycling between on and off states. In the case of the Q6012NH1LEDTP, its holding current is 3 mA and given a maximum gate threshold voltage of 12V, the maximum VDRM (Voltage at which TRIAC is able to conduct a specific current) is 425V. This ensures that currents up to 1A can be safely manipulated.

All in all, the Q6012NH1LEDTP is an excellent choice for all applications that require medium power switching or regulation, especially due to its low gate thresholds of 12V coupled with its generous holding current and maximum VDRM. It is ideal for motor control systems, as well as for various industrial or domestic applications.

The specific data is subject to PDF, and the above content is for reference