Q6015N5TP

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Thyristors - TRIACs

A TRIAC (Triode for Alternating Current) is an electronic component consisting of a three terminal, semiconductor-based, solid-state device mainly used to switch electrical power. The device is also referred to as a thyristor, or a bidirectional SCR (silicon-controlled rectifier). A TRIAC is capable of conducting electricity in either direction when it is turned on. As such, it is used in a variety of applications ranging from AC motor control to dimmable lights and home appliances.

Q6015N5TP - Overview

The Q6015N5TP is a six pin, bidirectional TRIAC rated at 1500V 4.5A. With a two-wire control input voltage of 4-32VDC, it is suitable for a wide range of switching applications. The device has low power losses, good thermal stability, and high surge current capability, making it a great choice for medium power switching.

Q6015N5TP Application Field and Working Principle

The Q6015N5TP is suitable for use in switch mode power supplies, AC motor control, and lighting control applications. It is also used in general purpose AC switching applications, including game machines, air conditioners, and other consumer electronics. It can be used for DC loads such as electric motors, solenoids, and relays.

To open or close the TRIAC, a DC gate voltage must be applied to the control gate. The voltage must be in the range of 4 to 32 volts. When this voltage exceeds the gate threshold voltage (Vgt), the TRIAC will turn on, allowing current to flow in either direction between the MT1 and MT2 terminals. When the voltage is removed, the current will be cut off.

The TRIAC’s performance is controlled by the gate current (Igt) used to turn it on. If a higher gate current is used, the device will turn on faster, allowing higher frequencies to be achieved. The gate current typically ranges from 1mA to 10mA.

The Q6015N5TP is designed for operation in ambient temperatures up to 125°C. To ensure safe operation, additional inrush current and overload protection may be needed for the application.

Conclusion

A TRIAC is an ideal solution for a variety of AC power switching applications. The Q6015N5TP is a six-pin, bidirectional TRIAC rated at 1500V 4.5A, making it a great choice for medium power switching. Its two wire control input voltage allows a wide range of switching applications and its solid state construction makes it a reliable choice for DC loads. To ensure safe operation, additional inrush current and overload protection may be needed for the application.

The specific data is subject to PDF, and the above content is for reference