RS1BHE3/61T

Series:	--
Packaging:	Tape & Reel (TR)
Part Status:	Obsolete
Diode Type:	Standard
Voltage - DC Reverse (Vr) (Max):	100V
Current - Average Rectified (Io):	1A
Voltage - Forward (Vf) (Max) @ If:	1.3V @ 1A
Speed:	Fast Recovery = 200mA (Io)
Reverse Recovery Time (trr):	150ns
Current - Reverse Leakage @ Vr:	5µA @ 100V
Capacitance @ Vr, F:	10pF @ 4V, 1MHz
Mounting Type:	Surface Mount
Package / Case:	DO-214AC, SMA
Supplier Device Package:	DO-214AC (SMA)
Operating Temperature - Junction:	-55°C ~ 150°C
Base Part Number:	RS1B

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Introduction
RS1BHE3/61T is a type of diode-rectifier single, also known as a bridge rectifier, which utilizes rectifying diodes to convert alternating current (AC) to direct current (DC). It has been widely used in power range applications, such as converters, AC/DC adapters, chargers, and inverters. The RS1BHE3/61T is particularly well suited for DC-to-AC conversion and is a reliable and efficient way to convert AC voltages to a specific DC voltage.

Design
The RS1BHE3/61T bridge rectifier is made of four rectifying diodes, which are split into two opposite parts. On the left is the anode part and on the right is the cathode part. These parts will produce direct current when hooked up to alternating current. The anode part is responsible for passing the current through the diode when the voltage drops, while the cathode part is where the current exits. This creates the ability to convert alternating current into direct current. The maximum current load allowed for the RS1BHE3/61T is 21 A and the voltage range is from 0KV to 1000V.

Applications
The RS1BHE3/61T bridge rectifier is commonly used in a variety of applications, such as converters, AC/DC adapters, chargers, and inverters. For example, the RS1BHE3/61T can be used to convert AC voltage to a specific DC voltage, such as 12V or 24V. It can also be used to convert higher AC voltages, such as 120V or 240V to lower DC voltages, such as 6V or 9V. In addition, the RS1BHE3/61T can be used as an inverter, allowing for DC power to be converted to AC power. The RS1BHE3/61T is also commonly used in renewable energy applications, such as solar and wind power.

Working Principle
The RS1BHE3/61T bridge rectifier works in a very simple way. It utilizes the pass-through and the exit points of the four rectifying diodes to convert alternating current into direct current. The alternating current is fed into one end of the bridge, which will then pass through the diodes in a certain order, such that either the cathode or anode of each diode will be responsible for passing through the current. This will allow for the direct current to be produced at the other end of the bridge. The amount of voltage produced by the bridge is determined by the voltage drops across the diodes and the current will be equal to the load current of the bridge.

Conclusion
The RS1BHE3/61T bridge rectifier is an efficient and reliable way to convert alternating current into direct current. It has a variety of applications, such as converters, AC/DC adapters, chargers, and inverters, which can be used to convert higher AC voltages to a specific DC voltage. The RS1BHE3/61T bridge rectifier works in a very simple way, utilizing the pass-through and exit points of the four rectifying diodes, which will allow for a direct current to be produced at the other end of the bridge.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description