SLP682M035E1P3

Lead Free Status / RoHS Status:	--
Part Status:	Active
Moisture Sensitivity Level (MSL):	--
Capacitance:	6800µF
Tolerance:	±20%
Voltage - Rated:	35V
ESR (Equivalent Series Resistance):	78 mOhm @ 120Hz
Lifetime @ Temp.:	3000 Hrs @ 105°C
Operating Temperature:	-40°C ~ 105°C
Polarization:	Polar
Ratings:	--
Applications:	General Purpose
Ripple Current @ Low Frequency:	2.78A @ 120Hz
Ripple Current @ High Frequency:	3.48A @ 20kHz
Lead Spacing:	0.394" (10.00mm)
Size / Dimension:	1.181" Dia (30.00mm)
Height - Seated (Max):	0.984" (25.00mm)
Surface Mount Land Size:	--
Mounting Type:	Through Hole
Package / Case:	Radial, Can - Snap-In
Series:	SLP
Packaging:	Bulk

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Aluminum Electrolytic Capacitors

An aluminum electrolytic capacitor, also known as an aluminized capacitor or electrolytic, is an electronic component that uses a thin aluminum oxide barrier to conduct electricity while also storing it in the form of an electric field. The aluminum oxide layer is used as an insulator and has a greater dielectric strength than many other electrical components. Aluminized capacitors are widely used in electronic products as they offer high capacity, low cost and long life.The SLP682M035E1P3 is an aluminum electrolytic capacitor, specifically used in high frequency switching power supplies. It is designed for use in desktop PC’s with a rated voltage of 35V and a capacitance of 680μF. It is surface mountable and has EIA (European Industrial Automation) standard mounting holes.

Application Field

The SLP682M035E1P3 capacitor is often used in power supplies, as it is able to store a large amount of electrical energy for short periods of time. This allows the power supply to quickly demand the energy it needs, without the need of constantly supplying energy, and without producing large oscillations in the output voltage.The capacitor is also used in voltage regulation systems. Voltage regulators are often used with DC power systems, and the transistor within the regulator can be overloaded if the supply voltage is too high. By using an aluminum electrolytic capacitor between the power source and the voltage regulator, the SLP682M035E1P3 effectively acts as a filter that absorbs high voltages and smoothes out the output voltage. This allows the voltage regulator to respond quickly and accurately.

Working Principle

The SLP682M035E1P3 aluminum electrolytic capacitor is a polarized electrolytic capacitor, meaning it must be connected the correct way for it to operate correctly. The two leads of the capacitor are marked as a \'positive\' and \'negative\' lead; the negative lead will have either a black (-) or gray (-) marking. Connecting the leads correctly ensures that the polarizing voltage reaches the capacitor and does not short circuit the device.The capacitor operates using an electrolyte solution, salt, plated inside a thin aluminum film. The aluminum film acts as a dielectric, while the two metal electrodes act as a conductor. When a voltage is applied between the two electrodes, a current will flow through the electrolyte, causing a polarization of the aluminum oxide. The polarization of the aluminum then increases the electric field, which is able to store a large amount of electrical energy.The SLP682M035E1P3 has a life of 5,000 hours at an ambient temperature of 85℃, and a ripple current of 2.0 Amps. The capacitor is also insulated with a heat-resistant acrylic and a flame-retardant sleeve, making it suitable for many applications.Overall, the SLP682M035E1P3 aluminum electrolytic capacitor is an extremely important device, being used in power supplies and voltage regulation systems for many different electronic products. Its high capacitance, low cost and long life make it an ideal choice for many applications.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description