TZX18B-TAP

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Zener diodes are widely used in many fields due to their unique properties, and they have many applications in electronic and electrical circuits. The TZX18B-TAP diode is a single Zener diode that is typically used in voltage regulation, current limiting and temp sensors. This article will discuss the application field of this diode and its working principle.

Applications of TZX18B-TAP

TZX18B-TAP is suitable for use in a wide range of applications, including but not limited to:

• Voltage regulation and stabilization (e.g. voltage sources)
• Current limiting circuits
• Temperature sensors
• Noise suppression
• Clamping circuits

The TZX18B-TAP is a single Zener diode, meaning that it is capable of providing a level of voltage regulation that is typically between 4 and 38 volts. The diode will regulate the voltage within a tolerance of ±20%, and it can be used in a variety of different circuits. For example, it can be used in series with another diode to form a simple voltage regulator circuit. It can also be used in rectifier circuits, or in noise suppression or clipping circuits. The diode has a good reverse leakage current, making it ideal for these applications.

Working Principle of TZX18B-TAP

The TZX18B-TAP is a Zener diode. As with typical diodes, it allows current to flow in one direction, but blocks current in the opposite direction. When the voltage reaches a specific threshold, the diode will begin to conduct in both directions, allowing a larger current to flow. This is known as the Zener effect, and it enables the TZX18B-TAP to provide voltage regulation.

In practical terms, this means that the diode will regulate the voltage to a set level when it is connected in series with a voltage source. The diode will ensure that the voltage does not exceed the Zener voltage (also known as the avalanche or breakdown voltage). When the voltage reaches this level, the diode will allow a current to flow in both directions, thus regulating the voltage.

The amount of current that can be drawn from the diode is limited by its power dissipation. This is because the diode will act as a resistor when a current is drawn from it, and the resistance can cause power loss. The power dissipated by the diode will depend on the circuit it is connected to, and it can vary depending on the voltage and current applied.

The TZX18B-TAP has a reverse leakage current of less than 200 nA, meaning it is well suited for use in applications such as noise suppression and temperature sensing. The diode also has a fast response time, making it ideal for the above mentioned applications.

In summary, the TZX18B-TAP is a single Zener diode with a voltage range between 4 and 38 volts. It can be used in a variety of applications, including voltage regulation, current limiting, noise suppression, and temperature sensors. The diode has good reverse leakage current and a fast response time, making it suitable for these applications.

The specific data is subject to PDF, and the above content is for reference