X40410S8-B

Series:	--
Packaging:	Tube
Part Status:	Obsolete
Type:	Multi-Voltage Supervisor
Number of Voltages Monitored:	2
Output:	Open Drain, Push-Pull
Reset:	Active High/Active Low
Reset Timeout:	Adjustable/Selectable
Voltage - Threshold:	2.6V, 4.4V
Operating Temperature:	0°C ~ 70°C (TA)
Mounting Type:	Surface Mount
Package / Case:	8-SOIC (0.154", 3.90mm Width)
Supplier Device Package:	8-SOIC
Base Part Number:	X40410

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Introduction

The X40410S8-B is a multifaceted solution for supervision and monitoring needs of many kinds. It is a member of a broader family of supervisory circuits, but precise, feature-rich and provided in a very small footprint. This makes the device an attractive choice for a variety of industries, particularly applications in semiconductor or consumer electronics.

Application Field of X40410S8-B

The X40410S8-B is an integrated power supply supervisor and monitor primarily geared towards providing advanced protection and monitoring capabilities for high-voltage applications. This device has been designed to provide the necessary protection and monitoring functions needed in any modern power management and power supply applications. The device can monitor both the input and output voltages of the power supplies, providing timely information for system protection, as well as for performance tracking and fault handling purposes. This, in combination with its other features, makes it suitable for applications in desktop and laptop computers, servers, consumer electronic devices and other distributed power supply designs.

Working Principle of X40410S8-B

The X40410S8-B functions by monitoring and comparing the voltages of the input and output power supplies, and then generating appropriate interrupts or signals in the presence of excessive, potentially damaging voltage levels. The device contains a high-voltage comparator and an evaluation logic section which can generate the necessary output signals.The device contains two high-voltage resistor based voltage references. The first reference has a higher voltage level, while the second one has a lower one. In operation, the voltages of the input and output power supplies are applied to the two references. An excess voltage on any of the references will cause the evaluation logic to generate an interrupt or signal, which can then be used to trigger the suitable response.

Features of X40410S8-B

The X40410S8-B packs a range of features that make it suitable for many power supply application fields. These features include a wide operating temperature range of -40°C to 85°C, as well as an operating voltage range from 4.5V to 12V. Additionally, the part has an output signal ground short circuit protection feature, an adjustable delay timing, as well as current consumption as low as 20µA. All of these features make the device a prime choice for applications with stringent performance requirements or with limited space constraints.

Conclusion

The X40410S8-B is a highly effective supervisor and monitor solution for power supplies in a range of applications. Its precise monitoring and protection capabilities, coupled with its operational features, make it an attractive choice for any monitoring or supervisory needs. In addition, its small size makes it suitable for applications with limited space constraints.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description