Z0103MN,135 Discrete Semiconductor Products

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Thyristors are semiconductor devices used in electronics and power engineering. TRIACs, which stands for triode for alternating current, are one type of thyristor and they are useful for controlling and regulating power in AC systems. The Z0103MN,135 is an example of this type of device. In this article, we will discuss the application field and working principle of the Z0103MN,135.

Application Field: The Z0103MN,135 is a four-quadrant triac specifically designed for use in medium-load switching applications. It can be used to control the speed of motors, control the power in light dimming circuits, and switch high current AC power supplies. It can also be used in heating, lighting, and solenoid applications. The device is isolated, making it appropriate for use in the most demanding environments.

Working Principle: The Z0103MN,135 uses four quadrants in its operation. In the first quadrant, the anode is positively charged, causing the gate to turn on and the triac to become conducting. In the second quadrant, the gate is shut off and the device remains conducting. In the third quadrant, the anode is negative, turning the gate off and ending the conducting state. Finally in the fourth quadrant, the device is shut off and no longer conducting.

When the Z0103MN,135 is used, a bipolar voltage signal is applied to the gate. In response, the device will switch between conducting and non-conducting states, depending on the polarity of the gate signal. This allows the device to control and regulate the power in AC systems. The device is fast and accurate, allowing it to switch at a higher rate than other devices.

The Z0103MN,135 is protected from over-current and over-temperature conditions by built in thermal protection and current over-load protection circuits. This helps ensure that the device does not fail or become damaged by excessive current or heat. The device also has a low stray inductance, which allows it to be used in high-powered applications, such as motor speed control.

In conclusion, the Z0103MN,135 is a four-quadrant triac designed for medium-load switching applications. It can be used to control the speed of motors, regulate power in light dimming circuits, and switch high current AC power supplies. The device is also protected from over-current and over-temperature conditions, making it suitable for the most demanding environments.

The specific data is subject to PDF, and the above content is for reference